Hello lovely people.
Im looking to extend my system further and I dont know which subwoofer pairing is better for (a pair of) 8361a’s?
2x7370a or a single 7380a? the w371 is on my wishlist but not in the budget unfortunately..
How important is to match subs spl with mains?even if i dont ever...
Hey everyone!! Been struggling with sub placement. I have an Arendal 1961v. Amazing sub. Used it to replace two tiny Polk psw111 subs. Needless to say big difference. But with both setups I only have bass at back of room on the platform chairs and near ZERO in the front row. With this bigger sub...
Hello,
So I build a couple of subwoofer enclosures that were originally intended for the Dayton RSS390HF. The enclosures are about 83L and with the RSS390HF that'd give me a qtc of 0.810 with the driver taking close to 400w before bottoming out at 20hz according to WinISD.
However, I recently...
Hi all,
I have a question about how to correctly connect up my subwoofers to an RME ADI2 PRO FS R be and also which mode to have the RME set to.
My set up will soon be as follows;
Source 1 - Intel NUC (ROON Core) -------- USB ---------- RME
Source 2 - TV -------- TOSLINK ---------- RME...
Hey speaker folks!
I'm relatively unexperienced in setting up systems, however I've decided to upgrade mine last week. I've upgraded to a NAD M33, Kef R11 and have also bought 2 Monolith 15in subwoofers (last still in transit). With the black friday and some bargain hunting I've composed this...
Hi all.
I have recently introduced an SHD into my system which is running a pair of Genelec 8341's
I am familiar with minidsp products having owned a 2x4HD for a number of years which has been running and EQing my dual subs happily and very successfully.
I am now trying to emulate what the...
Some of you may have checked out our Inkognito series, aka "high-end design subwoofer" (https://www.audiosciencereview.com/forum/index.php?threads/sigberg-audio-building-a-design-subwoofer-that-actually-sounds-good.15677/).
We're now looking at building our first "traditional" cube formed...
Hi,
My current setup:
Tidal> Laptop> S.M.S.L M300 MKII> Edifier R2800 powered speakers.
Thinking how to add sub or two subs to the system.
If one powered sub. Just need connect dac to sub and sub to speakers. Correct?
Thinking of JBL 310s and maybe upgrade to JBL 308P MKII speakers.
If...