dsp

  1. MarsianC#

    FreeDSP Aurora with ADAU1452, 8 channel In/Out

    Care to help? https://github.com/freeDSP/freeDSP-aurora Specs: Analog Devices ADAU1452, 294.912 MHz, 32-bit SigmaDSP 6144 SIMD instructions per sample @ 48kHz fs 40kWords of data RAM 800ms digital audio delay pool @ 48kHz fs 8 stereo ASRCs with 139dB DNR XMOS...
  2. A

    Dac - Dsp - Crossover

    Hi, I'm new to this forum and hope you forgive my mistakes. I'm a old audiophile who wants to upgrade his (now) simple system (Oppo BD95 + Pass Labs amp + Magnepan MG 3.3) to multi amping. As everybody says Magnepans should sound better in multiamping (maybe all of the loudspeakers do) and I...
  3. xykreinov

    Active Designs & Their Favorability

    Why are active speaker designs so favorable? Should space be available, why wouldn't you want to have the dac, dsp, and amplification devices be independent of the speaker? This allows for easy upgrades if so desired, as well as more control over the hardware in general; you'll likely choose...
  4. dallasjustice

    Mitch Barnett's New Calibration Service

    @mitchco Mitch Barnett recently launched his Accurate Sound Calibration Service. Mitch has been a great teacher to many. Mitch is a DSP, low frequency optimization and active loudspeaker enthusiast and evangelist. Mitch has written extensively on this topic which includes a complete guide in...
  5. MichaelEA

    DSP basics and FIR Filtering

    I often see questions asking for more information about FIR filtering and the pros and cons. I've put together an article describing some DSP, FIR and IIR basics, and applications in audio. https://eclipseaudio.com/fir-filter-guide/ Let me know if you find this helpful, and/or if there's...
  6. M

    Can't understand something simple

    I read the following sentence in this The Scientist and Engineer's Guide to Digital Signal Processing By Steven W. Smith which talks about ADC & DACs. "For example, suppose that the ones and zeros are represented by 5 volts and 0 volts, respectively. If 80% of the bits in the data stream are...
  7. dc655321

    Integrating DSP Engine into the Linux Audio Stack

    I would very much appreciate some input from the wise members of this site on various aspects of implementing and integrating a convolution engine into the Linux audio stack. I'm thinking of members like @Cosmik , @mansr , @pos, @yue or others that may have some experience digging around in the...
  8. dallasjustice

    JBL M2 Audiolense Digital Crossovers w/Subs

    I first became seriously interested in purchasing the JBL M2 when I was with @amirm at CEDIA 2015. I heard the Harman demo room and was shocked at the sound quality I heard. The Harman demo at CEDIA is like waiting in line for the Pirates of the Caribbean ride at Disney World with my kids...
  9. amirm

    It is All Software!

    It is All Software By Amir Majidimehr [Note: this is an article that was published in the Widescreen Review Magazine] OK, it is not all software but most of it is. What am I talking about? I am talking about video! Yes, video. Please don’t flip the page. Let me explain with a bit of...
  10. amirm

    DSPs: What They Are and Why They Are Used

    DSPs: What They Are and Why They Are Used By, Amir Majidimehr Let’s take a look at the typical spec sheet for an Audio/Video processor, in this case an Anthem D2v: “Two dual-core digital signal processing (DSP) engines, our own DSP design, offer a total of 800 MIPS to allow decoding of the new...
  11. amirm

    Target Room Response and Cinema X-curve

    There Is No "There" in Audio By Amir Majidimehr [Note: this article is slightly revised version originally published in the Widescreen Review Magazine.] Readers of Widescreen Review Magazine no doubt are familiar with video calibration and its importance in getting proper images from their...
Back
Top Bottom