delay

Until now, I kept things simple regarding delay and phase: subwoofer at the front, between the speakers, phase at 0°, and done. Curiosity got the better of me, so I connected a hardware DSP to a secondary system (desktop, near-field setup) specifically to enable independent delay adjustment for...

Hello, I am currently working on fine-tuning my 4-way audio system: 20 - 100 Hz: JBL 2245H (bass reflex) LR 24dB 100 - 250 Hz: JBL 2226H (sealed) LR 24dB 250 - 2.5 kHz: JBL 2123H (sealed) LR 24dB 2.5 - 20 kHz: TPL 150 (version 1) (AMT) LR 24dB I am equipped with REW, a Scarlett...

hi there, this forum was quite useful to me during the setup of my as precise and neutral as possible 2.1 system setup so far. It is a desktop setup which i wanted to share with you since it somewhat reached a level where i thought there may be other people who share the passion and want to give...

I have decided to go with 2 subs that apparently have a fair bit of delay due to all of the processing they do. (KEF KC92). Someone recommended to use the miniDSP 2x4 HD, as it not only does room correction, but also has adjustments for speaker delay. However, the miniDSP 2x4 HD does not have...

I'm planning adding a subwoofer to my system, but I don't want to use external DSP. Are there any guides I should follow in order to phase (/time) align the subwoofer to the mains solely by positioning and through the sub's own dsp settings (crossover, phase, etc.)? Can it be done? Thank you

Hi, I just acquired an SMSL stack for desktop use composed of: SMSL SH-9 desktop amp SMSL SU-9 Pro desktop DAC And after a day of configuring, testing and digging, I found out issues that will make me return the stack as it's an UX downgrade compared to my old Schiit stack Modi3+Magni3...

I was contemplating on creating a "tutorial" of sorts for all XMOS drivers on devices that have a cutoff -- latency between the start of a sound and the dac "reacting" and actually playing said sound... So here it is: XMOS drivers use a control panel not unlike this: Usually the "Options"...

Hello guys, I am having some latency issues with my Denafrips Pontus DAC. I measured the latency using the RME Fireface UC USB interface and the REW software (using loop-back as timing reference ). I made 20 measurements, one after the other with only a short delay (few seconds or less)...