d50s

  1. NormB

    Topping D50 barrel connector SIZE

    Been all over the web on this one. OUTSIDE diameter of the 5 vdc connectors are definitely 5.5mm, but what’s the INSIDE/PIN diameter? 2.1, or 2.5mm? I’d like to order a “better” connector (like Oyaide from Ghent Audio) with a shielded cable instead of using the 20 gauge 2-lead zip cord...
  2. R

    DAC for HD800s & A50s - anything else except D50s?

    I am looking for a Dac for Hd800s and A50s amp. Is there any reason to look at anything but D50s? I am already EQIng the HD800s so I don’t need Adi-2 or anything with built-in EQ as I would prefer to use software for that anyways. Also don’t want to spend more than $250-300 used
  3. R

    AMP good enough for my new headphone (HD800S)

    Hi, I’ve recently bought a Sennheiser HD800s and now I would like to know if my Topping A50s in combination with a topping D50s is good enough. I find it a bit complicated to know what is good enough with all the ohms and wattage calculations. To prevent me from buying something which is...
  4. S

    Windows 10: 4 sec L channel silence -> mute???

    Windows 10 USB, 44.1 kHz, 32 bit Topping D50s (3. ATUO: OFF) When there is audio signal only on R channel, the audio goes off after about 4 seconds. When there is audio signal only on L channel, the audio is on continuously. For example, I can play this youtube video (music signal only on R...
  5. L

    AudioEngine HD6 inbuilt DAC or the Topping D90 MQA or D50s? Currently own AudioEngine A5 and Topping D50s. Looking for a upgrade.

    Help me pick a sound system. I already have a Yamaha YST-SW515 woofer that I'm satisfied with, I just want a good speaker (HD6) and a DAC for HiRes Audio. Mostly play my music from bluetooth since I have no PC. Is there anyway I can get top notch sound from bluetooth (iPhone) or should I buy a...
  6. J

    Stack or Combo? (M500, E30 L30, D50s A50s or schiit magni/modi 3)

    Hi All, I am very new to this. I just got an active speaker (Edifier S880DB). I am looking at Dac/amp for the speaker and to control the speakers from the amp. So based on the price in my country, the: Price of SMSL M500 = Price D50s + A50s > Price Schiit magni+modi = Price E30 +L30. My...
  7. A

    Another Topping D50s output voltage issue

    First time posting on this site. I just wanted to let people know that I am having the exact same issue that willy65000 described in his post a number of weeks ago. I purchased a Topping D50s to function as a preamp/DAC for my Parasound Zonemaster 2350 Amp. The output voltage is insufficient...
Top Bottom