3-way

KSD is a long term well established audio company from Germany that recently acquired limited distribution in the US. They have a very unique design with their A200 mk2 line which includes a 10” low driver, 3” soft dome mid, and a silk tweeter in a nearly closed cabinet made of I believe a...

Hi everyone! Many of you probably know that I am developing the other models in the Cadentia series. Including a 3-way centre channel model, Cadentia C. The Cadentia C project started quite a while ago, but has been on hold since I have to prioritise getting the Cadentia 3 into production. I...

Came across this relatively new offering from Chinese manufacturer SOVOX at recent Music Guangzhou 2025 Trade Show. Basically, the MINI MAX3 has 4 "drivers" per speaker - 3-inch coaxial driver + 3.5-inch woofer + 5-inch passive radiator, in an aluminium cabinet. As for power, Dual Infineon...

The drivers: DSA135-8 link PC83-4 link ND28F-6 link Filter schematics and and charts: THD -47dB or 0.5% (at 86dB) Assembled crossover (3 filters): Component costs: c.a. 280EUR/pair (including drivers) Box dimensions: 290x174x263mm. Only the tweeter is flush-mounted. Midrange driver...

Was perusing the SB Acoustics website for drivers and came across a new 3-way speaker design: https://sbacoustics.com/product/gema/ Appears aimed at the market for those pining for the days of big woofers with wide baffle cabinets.... The drivers are all pretty reasonable however it uses a...

I have been working on this project for a long time, and finally finished it. The concept is simple: a 3-way speaker with full-range directivity control. Design and optimization of waveguides was done with Fusion 360 (modelling) and AKABAK (simulation). I will not bore you with the details, but...

Hi everyone, i have the swissonic x8, 3-way studio monitors from thomann musicstore, they were 530 euro for a pair. I’m also considering adding a subwoofer later. I’m wondering if i could get something better for this price level, but there isn’t alot of info or tests on these. Could anyone...

Hi All. I received the BMR Philharmonitor kits from Meniscus last week. I am planning to do some custom Baltic Birch Cabinets on my CNC with curved sides. Purely for aesthetic reasons and because I love designing things. My first renders are here, and I will keep the post rolling as I move...

Dear all, being new here on this forum I thought I start my little thread here, topic see above. Feel free to ask, criticise, comment, whatever ;) - I'm very open to new ideas. Please keep in mind I'm keen on walking unpaved roads too ;) and also willing to go for the extra mile just to achieve...