Search results

Hi all. I am selling my beloved RME ADI-2 PRO FS R BE. I have opted to sell because I run multiple subwoofers and require options for fine tuning delays, gains and PEQ which the RME just cannot do (with the exception of PEQ of course). I do not want to sell this item but, due to the above...

I have recently been on a REW adventure trying to learn how the product works and to dig deeper into it's many many useful features and came across this guy: https://www.youtube.com/@ocaudiophile He is a REW specialist and has many useful videos on his channel which, admittedly, most of which...

Hi all, So I set myself up today to re-calibrate my system which I was looking forward to but have had problems with REW not seeing my DAC's digital interface? I use an RME ADI2 PRO fs be and am connected to my laptop via a USB cable yet REW only sees the analogue 1+2 interface? Can anyone shed...

Hi, Just a quick question really. Is there a way to disable both the bass drivers and mid-range driver on my Genelec 8341AWM's within the GLM software? This is just for the purpose of carrying out subwoofer measurements where I require an acoustic reference so just need the tweeter to function...

Hi all, I have posted a fair few posts in the past regarding the set-up of my 8341AWM's with subwoofers so I guess one more post won't do any harm! :) As mentioned previously, I have recently purchased a pair of Arendal 1723 1S subwoofers to go with my Genelec 8341AWM's and am really happy...

Hi all, I have a question about how to correctly connect up my subwoofers to an RME ADI2 PRO FS R be and also which mode to have the RME set to. My set up will soon be as follows; Source 1 - Intel NUC (ROON Core) -------- USB ---------- RME Source 2 - TV -------- TOSLINK ---------- RME...

Hi all, Just a quick question really. Is there any way to NOT use any of the filters included in the RME ADI2 PRO? I'm using Genelec 8341 SAM Speakers which have their own DSP in-built so do not want any filtering applied to the signal before the SAM speakers. Is this possible at all??

Hi all, I'm hoping to hear from some Genelec subwoofer owners/users with regards to their set up at home/studio. I own a pair of 8341's and have decided to go "all Genelec" in my home set up and have ordered a pair of 7360A's. Focusing on the subwoofers only, I currently use a pair of active...

Hi all, My current audio set up includes a pair of Genelec 8341AWM monitors combined with a pair of non-Genelec 12" active subwoofers. I use a MiniDSP SHD (full fat version) as volume control, input selection and parametric EQ for my two subs. I have decided to take the plunge and go for an...

Hi all, I hope you are all well? So I bought some new speaker stands for my Genelec 8341A's which required me to carry out a new GLM calibration and REW sweep for my subs and crossover. I ran the GLM software which, as some of you may know, is a fairly painless procedure and I was over the moon...

Hi all. I may have asked this in another thread but I can't remember to be honest so I'll post again just to nail it down once and for all. My aim is to have a "fully digital" set up with an all Genelec system (mains and subs) so I will not need a DAC for the purest digital signal for my...

Interesting one this....... https://www.dyson.co.uk/en Early April Fools' joke or real?

Hi all. I have a question regarding the Genelec GLM software and how it integrates the "7" series SAM subwoofers with compatible SAM Monitors. I am considering replacing my aged 12" sealed active subwoofers (Analogue RCA input only) with the 7350A to create a purely Digital signal flow from my...

NO LONGER FOR SALE Hi. This question/request only applies to the UK audience on here for obvious reasons which I will explain below. I bought a pair of Genelec 8341AWM in White from "Music Matter" in May 2021 and I absolutely love them BUT.......the wife hates them with a passion and she...

Hi all. I currently use a minidsp SHD as a DAC/Pre/source selector for my Genelec 8341's and dual subs. I used to own an RME ADI-2 FS v1 and foolishly sold it not realising its potential. The main thing I miss about the ADI-2 is its ability to add "loudness" automatically as well as a number of...

Hi all. I hope you're all well. :) I just thought I would ask you Genelec owners what you're feeding them with as I'm curious to know how people get the best out of them. I own a pair of 8341's in white in a home environment. They are fantastic and their GLM software is something else...

Hi all. So, lets get it out of the way, I'm a bit of a "box swapper" and enjoy doing the research on various new items in the audio market which may or may not improve my listening experience. I'm going through that phase now and have a couple of questions which, depending on the answers, will...

Hi all. I have dumped all my passive gear in favour of an "active" set up as I feel that this is the way forward. After spending a long time reading reviews and scouring the internet, I landed on a pair of Genelec 8341's. The in depth reviews and discussion on this forum certainly helped with...

Hi all. I have recently introduced an SHD into my system which is running a pair of Genelec 8341's I am familiar with minidsp products having owned a 2x4HD for a number of years which has been running and EQing my dual subs happily and very successfully. I am now trying to emulate what the...

Hi all. I own a pair of 8341's in white and am looking for a suitable pair of stands to go with them in lounge environment. I've bought the Genelec 8000-400 stands and they're obviously perfect for them but the stands are just not wife friendly at all! The base is far too big and they look out...