Search results

Interesting. Strangely, clicking back and forth between Madisound and Speakerhardware, they both seem to associate a two-way cabinet with this three-way Morel driver set. ?

You might have a look here: https://www.madisoundspeakerstore.com/2-way-speaker-kits/ Note that for some of those kits, a cabinet is available from speakerhardware.com -- look for links within Madisound's product descriptions. Another way is to pick up this cabinet and use a...

There's this official link, which will get you to both Windows and Mac versions of both the app and firmware V1.03 https://www.tpdz.net/newsinfo/778017.html If you want 1.04, I can tell you that I had no problems with the file from the Google Drive link.

Thanks; I see the blue ethernet cable now in photo :).

NiagaraPete, does Wifi work okay from within that metal case? And do you happen to have a photo showing the back side, with the S/PDIF outputs? Thanks.

The E50 and the SMSL are virtually identical in price, and the SMSL supports Bluetooth and does not require an external power supply. Just pointing out things you probably know already. The tick mentioned by Dunring may or may not apply in your application.

"...a balanced DAC and an unbalanced preamp connecting to multiple other sources." :)

I expect so, and I have one. (My post #640 above :))

Yes, besides a DAC I have, primarily, a turntable with phono stage, and a TV; but also a cassette deck and an FM tuner, and occasionally a reel-to-reel. The S/PDIF out on my TV doesn't work right. So all have RCAs for output, though I expect I'll soon have a DAC that also has XLR. Not that...

The only way to shift from the XLR to the RCA inputs is with a small switch located on the back panel, correct? It would be handy if the switch were more accessible, or if a remote were supplied. You could then switch between, say, a balanced DAC and an unbalanced preamp connecting to multiple...

Ah, no wonder they look good. Thanks.

Which outrigger product is this, DonR? They look better than what I've found to date. Thanks.

Feesh, am I reading your test write-up of February 15 correctly, and all cases of D6-s pop are via the XLR outputs? No cases of a pop when using the RCA outputs? Thanks.

Re: the speaker outputs, it used to be that Yamaha used these "push and grab" connectors on lower-end stuff, and binding posts on mid- to higher-end gear. See attached photo from my c. 1989 AX-500U integrated, similar if not identical to the binding posts used on my mid-'90s Arcam amps. Not...

I have a pair of AKG K501 in good shape. Look them up if not familiar. Nice sounding, unusual headphones. I will give you a good price; less than your $100.

Oakland, Calif USA

OK, I see. A way to test the Mani. Thanks.

Explain RCA shunt? Would appreciate.

This one: https://a.aliexpress.com/_EHTv1Dl

Many thanks for this. Are you finding a diagram somewhere for that AliExpress splitter? And are all the connectors male? The USB A is, can't tell about the input-side USB C.