Search results

My Arya v2 can easily utilise 60% volume on high gain without any clipping on amp and headphone side, only my ear starts clipping for heavy bass, I guess d10b 4.2v will makes a30pro run out of power at high gain 70% volume rotation if you use power hungry headphone like suswara, remaining...

When I brought arya ,i used fiio k3 dac amp combo which outputs 200 mW power, i can clearly hear clipped bass. For movies and games my arya V2 requires high gain 3 oclock + volume on A30 pro for breathtaking bass dynamics and still arya can handle skull vibrating low bass without clipping, till...

@Waterunderthebridge For A30 pro, d10b DAC 5V usb c powered is headache less set-up compared to external ac powered D30 pro DAC, it consumes only 5 v 0.25A current from my samsung m30s 6000mAh.

For arya v2 A30 pro provides more headroom if you are into EQ(bass), l50 is enough if u are not into EQ. For stealth arya go for l50

@Disconnect I'm using my DIYed amd stock cpu fan converted to usb A 5v adapter powered spinning below 1000rpm to suck the hot air from the holes and it cooled amp chassis instantly, Blowing air into to the holes results in dust accumulation. So i preferred suction method.

Completed 1st anniversary of sound stage king aaaaryaaaaa:D. Hope he serves long time with out blowout of nanometer thick diaphragm. https://drive.google.com/file/d/1-8058ONikCBudtGMKgjsUPC9w_hz_E1Z/view?usp=sharing

@epidimik My arya V2 requires high gain above 12 o'clock for new recording, for older recordings above 1 o'clock gives punchy experience,

Hello Does Any member confirm a30 pro 4 pin XLR female jack provides ground connection for headphone 4 pin xlr male cable metallic shell grounding?

I compared 4 pin XLR and 6.35mm out on A30 pro with my aryas stock 6.35mm and newly brought 4 pin XLR cable, obviously noticed below improvements with XLR over 6.35mm jack, Soundstage feels expanded, No harsh vocals, feels smoother even when volume turned up, Channel separation on tracks having...

Hello I'm planning to buy 4 PIN XLR Cable for my arya after seeing this Review https://www.audiosciencereview.com/forum/index.php?threads/topping-a30pro-review-balanced-headphone-amp.20366/post-872998 I know that power wise all three Jacks are same but does 4 pin XLR amp HP out measures...

There is no program available to scan for DC offset in audio library, but once your AMP detect DC while playing DC source you can use wave editor for Android which showed the DC OFFSET in recording waveform.

I found a permanent solution for A30 pro going into DC protection when driving power hungry HP on high gain, high volume. By applying negative 30db gain to 10hz band in peace EQ software the DC offset in audio can be attenuated, and hence no more shutdown of amp when playing audio which has DC...

Yes, Arya can handle huge deep bass notes without distorting highs, but my dynamic driver hd 598SE open-back starts distorting and clipping for normal bass content itself. Previously I was using topping a50s amp which output 2W/ch, even at full volume and gain maxed, bass response was weak, less...

Yes, amplifiers headroom affects fidelity of HP , today I was playing above track with peace equalizer set to 0 db gain and prevent clipping was enabled. Suddenly a -6db preamp was applied by peace equalizer, then i zoomed the peak waveform which showes the clipping of audio. So I applied -6db...

I tried peace EQ and adjusted right channel high frequency band, sounds balanced now. Now i no need to crank up volume as before.

Since my right ears high frequency sensitivity is less that's why i require more amplification i guess.

Finally unlocked Arya v2 full potential with topping d10 balanced DAC, topping a30 pro AMP Pure distortion free audio chain, only my ears starts to distorts at high volume. Came to know that Arya really require minimum 3Watt per channel to fully unlock its potential. Funny thing is i thought...

I too had same DC protection with my a30pro. I downloaded your flac file and checked the waveform,It looks weird. The FFT graph has infinite low frequency peak and scope graph shows offset from zero.

What about dc in audio? When i play recordings having DC source the a30 pro shut off and on at peak volume with my dc powered fiio k3 usb dac. Will a30 pro goes to DC protection when paired with D10 balanced same as my fiio k3 since d10 balanced also dc powered.?

Hello I'm new to this thread I have a30 pro and hifiman arya Confused which one to buy,D10 balanced or D30 pro for normal laptop musicbee player. Is there significant sound difference between both unit? Does spending more on d30 pro gives any large sound difference or what.