Search results

Google definitely not working as well as before anymore. Always wish to see a waveform captured from a scope, analog’s the best, so we also know the frontend isn’t limited.

looking forward to see someone actually measures and publishes the rise/fall time of a strike in real life.

why not? synthesizers are like arb waveform gen these days, and percussion = impulse by definition

that explains crosstalks and how gorund ground leads/wire/plane between conductors helps

for some reason the index cannot be viewed on iOS (iPad/iPhone) ?

I actually use 2 speakers for C instead

has this unit been aligned and calibrated already?

Contrary to many beliefs, Dolby Atmos, is just bed channels (ie surround) + objects/height. It can work right out of the box if you have done set-up and alignment (time, phase, amplitude) externally already (ie right room design and speaker placement). They are virtual models and designed to...

Monitor controller doesn't decode anything afaik. They simply take multi-ch PCM/DSD and do all the routing/up-mix/down-mix matrixes with a flip of switch outside the box. m908 System Flow Diagram Rev C

a lot of times, the bottleneck is either the room, alignment, or gain structures. Replacing equipment is easy, so there is no point to single out an equipment. The other two done right at the first time, not so.

Get your room built right first. Then alignment. Then we talk about hardware.

For max system bandwidth for fastest rise time?

more power will drive transient better and handle back EMF better

because parts are big and heavy, air to move is also lots and heavy, and human are fairly insensitive to low frequency which needs a whole lot more to make up the perceived loudness

I too just realise recently ;), you can check out volume control ICs such as Ti's PGA2310, inside you will find how a 2-ch IC can cascade and expand control further.

It sounds easy when we say daisy-chain, what happens behind involve addressing, pre-assigned or routing. For pre-assigned, there'd be a dedicated slave like Topping's Ext90; for manual routing, it'd be like AES/EBU channel assignment on studio monitors, or matrixes in mixers, AoIP...

how about 8430A IP? you only need a L3 Ethernet switch to perform all the functions

not in the sense of IR true, but if they do AoIP and are connected to a switch, they can be remote controlled just like your AVR, on your phones browser, 100m away with copper, 1km+ with optical fibre

Well good things cost, best thing doesn’t come easy and focusrite works too. There’s really nothing I need to address about the price difference, options are well presented and the choice is yours.

Yes they do, Ravenna/AES67 is an open standard and application spans from music to film and broadcasting. Look further down in the download section and you will see. https://www.merging.com/products/alsa_ravenna_aes67_driver