Search results

Late notice, But tomorrow at 8am we will be meeting at Elly's Brunch and Cafe. https://maps.app.goo.gl/KPzk28w9VWasaFrC9

Meetup scheduled for 1/20/24 at a members house near cave creek area. PM for address 4:00pm start time but I will be over there a little earlier with the JL max dialing in his system, so if you want to see how that is done, I will be starting around noon.

My ground loop path was coming from the cable coax and being transferred via the hdmi cable. I could never find the cause of the cable coax other than disconnecting it all the way at where the cable was coming into the house. Agree that grounding chassis isn’t always going to fix it, but...

Nearly every time I’ve tried tying cases together it has lowered noise. Usually some stuff is using a two prong plug and some is using a 3 prong with earth ground. That’s usually when I see ground loops like this and when it has worked.

I ended up needing to tie chassis’s together to eliminate the noise by running a separate wire between chassis bolts on all equipment. That was what ended up solving my ground loop. Now I don’t even have any of that equipment anymore. As far as the monoprice, I knew it did because I had that...

There is a review index on this site that is pretty good, although some reviews are missing from it too. Also erins audio corner does reviews and has quite a few center channels. He also has a klippel nfs.

Each module has its own power supply in these amps. So power available is solely based on your wall power availability. If you have adequate wall power available, the. It could produce all the rated on all channels driven.

Meetup here this Friday at 10am! 9920 S Rural Rd Suite A105, Tempe, AZ 85284 https://maps.app.goo.gl/WySNRuuCn2jrmewBA?g_st=ic

I like the adau1467 eval boards

This Saturday (10/7/2023) @ 6pm. Meeting outside of State 48 Funk house in westgate 6770 N Sunrise Blvd, Glendale, AZ 85305 https://maps.app.goo.gl/Z7SMGf5NijTmag5Y8 Then over to a members house to check out his chane speakers and hsu subs (cars will be there too to check out if you want!!)

Pin 1 is connected to case ground in that diagram of hypex. You can see a little wire on the case side coming from pin 1 to the case. Now the pin 1 being connected to the "4th" connection of the xlr (the metal casing) can be debated, but that just connects to case ground too....so shouldn't be...

Also a few of us will be attending this next Thursday 8/24/23

Sorry for the late notice, but meet up tomorrow! Lets meet here this Saturday 8/19 at 9am if that works for all! First watch 3110 N Central Ave, Phoenix, AZ 85012 https://maps.app.goo.gl/7PmfLyyJcRi5s69f9?g_st=ic

That drop is 0.5dB by 20khz…not something to worry about.

Forgot to update this with sold. So I don’t have an extra pair to send

DLBC is not included, but there is a 30% off sale. so $350 for the multi sub stuff or $250 for single sub. https://www.dirac.com/online-store/monolith-htp-1/

Best buy dropped the price of the kef r stuff more $1099 for a pair of r3's! https://www.bestbuy.com/site/kef-r3-series-passive-3-way-bookshelf-speakers-pair-black-gloss/6309092.p?skuId=6309092

All cheap measurement microphones are about the same. As long as they have a cal file that is accurate for that individual microphone, you should be fine. Once you get to the better microphones such as earthworks, then the tolerances get very tight and the cal files do not matter as much. You...

For those that have questions of what this can do, I strongly encourage you to go through demo mode of the custom GUI. http://htp1.jsoosiah.com/settings/upmix or take a gander at the manual...

DLBC is an upgrade option at $499 IIRC. It has a few different things, check out this custom GUI a member at avs built. You can see the options. May need to click on the demo button http://htp1.jsoosiah.com/settings/loudness