Search results

  1. V

    Review and Measurements of Paradigm PW-Link Streamer/DAC

    When I inquired about supported bit depth and rate for the Link, I was told the following about the toslink output: The physical optical output supports 24/192 Curious to know how others came to confirm the reported limits of 44.1 or 48 khz. Anyone experiment with bit depth?
  2. V

    Review and Measurements of Paradigm PW Amp

    Very much looking forward to these measurements. I have a PW Link, using it (via its optical in and optical out, with a couple of SPDIF/toslink converters) as an ARC processor, in combination with a networked streamer (Pi + Allo digione) and the Khadas tone board. Would love to see its...
  3. V

    DAC with Equaliser and/or Room Correction.

    Here is the timely reply from Paradigm: ARC will be applied to the physical outputs, whether it is analog, or optical output. ARC will be applied regardless of the input source, Play-Fi, optical, or analog but only from the optical / analog outputs. ARC will not be applied if you are using...
  4. V

    DAC with Equaliser and/or Room Correction.

    I had corresponded a bit with Paradigm prior to making my recent purchase. They indicated that ARC was applied to "all inputs," but then called out streaming and analog specifically. I have written back to ask about the Toslink input specifically. Analog is digitally sampled at 48 kHz for...
  5. V

    DAC with Equaliser and/or Room Correction.

    I've ordered the PW Link. At its price, it makes an interesting low cost option for room correction with digital output to an existing system. Since Amir is a fan of room correction, maybe we can get it in the queue for testing?
  6. V

    Optical to Coaxial converters introduce jitter?

    Thanks Archmage! I followed your link and am considering a similar chain (toslink to SPDIF converter connected to Tone Board). In the JDS Atom thread linked from your post there, I see Amir's comments on the converter: "No. I have one of those to test just to be sure they don't screw it up! "...
  7. V

    Optical to Coaxial converters introduce jitter?

    Sorry to resurrect a zombie thread but wondering if any of these converters have ever been tested here (spdif > toslink and vice versa)?
  8. V

    Designing a 3D Printable Case for the Khadas Tone Board

    Very nice. I have both the digione and the khadas, let me know where to sign up :).
  9. V

    Designing a 3D Printable Case for the Khadas Tone Board

    You are getting the Khadas case from this thread laser cut instead of printed? Any differences from the PL printed case to note?
  10. V

    Designing a 3D Printable Case for the Khadas Tone Board

    Is there any temp issue with the tone board? I had read that the Khadas VIM2 runs pretty hot...? If so, some ventilation in the case might be warranted?
  11. V

    More design details about Khadas Tone Board

    Given the effort involved in DIY solutions, this is more than worth it. How about just bezel/front panel to mate with the board? Though I suppose in most cases this would be the rear panel...!
Top Bottom