Search results

While it's technically a 3-way system, it's not simply a 3-way speaker because it operates in a cardioid pattern. Model names ending with "C," such as C6C and S6C, all refer to speakers that operate with a cardioid characteristic. For cardioid operation, unlike typical analog crossovers, the...

The speakers you listed are active models with built-in amplifiers. I think if Ascilab launches passive tower speakers, you could expect them to be under $2,500. But for tower speakers, the shipping costs might be greater.

I'd appreciate it if you could share the results of the GR Research crossover upgrade, both before and after. I'm very curious to see them.

The SM5 costs $3398 per pair, while the F6b is $835. It might not be fair to compare the performance of speakers with a price difference of more than four times. Also, if the comparison discussion continues, it's highly likely to stray from the main topic of this thread.

https://audiosciencereview.com/forum/index.php?threads/ascilab-c6b-f6b-launched-%E2%80%93-ask-questions-share-feedback.62397/post-2321692 They planned.

https://audiosciencereview.com/forum/index.php?threads/ascilab-speakers-are-about-to-launch.54794/post-2322790 Ascilab is planning to release a 3-way floorstanding speaker. It's not yet known whether it will use Purifi woofers.

The average listening room size in Korea is approximately 10-16 square meters. This value was derived from a survey I conducted with 89 Korean speaker users.

Hello Amir, thank you for the wonderful review! Are you planning to measure the F6B with the passive radiator as well?

I think Mishael said that because monoandstereo.com has too many ads.

https://www.puriteaudio.co.uk/_files/ugd/5cac3a_dd3effcb0da34b038138cf5597f37d25.pdf C6C was listed as $5k in this file. Has the price changed?

That bat just hit my brain!

I could really feel their pain in #5 of the title. NFS takes 2 hours for a single scan, meaning they spent over 10 hours measuring just one speaker. And the simulation? That probably took way longer. Watching them design the waveguide and cardioid themselves, I could sense an almost obsessive...

Endgame 2-way speaker! I can’t imagine a better 2-way passive speaker than this. It seems like the 80Hz MD data is missing. Edit) I found that data in the attachment.

I compared the c6c with commercially available cardioid speakers. The order is kii3 - c6c - 8c - point zero - cdm65. They are arranged based on the lower frequency limit of the cardioid pattern. Excluding the bandwidth, the c6c seems to be the best option. (di is remarkable)

No instances of the assembled bolts coming loose have been found so far. However, Loctite can be used to prevent such issues. For this reason, I’ve included Loctite 243 in the list of materials. Since I’m planning to improve the speaker design, I haven’t used Loctite yet. Once the speaker...

Hi, I measured the impedance of CA5. Thank you for your advice. My measurement sequence was as follows 1. Measure the impedance of the CA5's woofer and tweeter. 2. Disassemble the CA5 and measure the impedance of the woofer and tweeter. 3. Compare the impedance of the disassembled unit to...

Hi, I have built a DSP built-in amplifier to run the CA5. The amp is built in a 1.5U rack-sized aluminum case. The main components are minidsp 2x4hd, two 3E Audio 260-2-29A, and two Meanwell LRS350-48. The input signal can be selected between XLR terminals and minidsp 2x4hd, and the output...

I have never done any measurements that would intuitively show cabinet resonance, and I apologize for claiming that there is no resonance without any objective basis. I know that stereophile.com uses accelerometers to measure resonance, so I will try that in the future. I have measured the...

Hi, thank you for your interest in my project. 1. my enclosure was made by an aluminium CNC specialist, I paid around $500 for it. In my opinion, the advantages of aluminium enclosure over MDF are as follows 1-1. no need for clamps and large workspace. One of the inconveniences of making MDF...

The CA5 was measured by @Nuyes using Klippel device. The measurements were as follows. More measurements and explanations of the measurements can be found at the following link. https://audiore.kr/ca5-diy%eb%a6%ac%eb%b7%b0/