Search results

  1. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Good advice on the mono measurement, much easier to see. Definitely not identical. But should it be that jagged?
  2. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Subwoofer is ordered but... wont be in stock until Dec 6th :(;) If the doctor can prescribe "acoustic treatment", I'm in! :p Today I did Pre/Post Dirac measurements but they look nearly identical... Why is that? I would have expected it to pull it into shape a bit better... MDAT attached.
  3. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Wow! Appreciate the in depth analysis, Keith. I read through that list and am confident that I ticked all the boxes when measuring. As I said in my first post: UMIK1 @ 90deg with Calibration file. Listening position located with a laser measure pointed at mid domes with measurement in mm’s etc...
  4. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    I feel like todays changes have been quite positive! But I'm not an expert at reading measurements... Here are the old vs new. What do you think?
  5. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Today I’ll mess around a bit with position just for the hell of it and see what else I can discover about the space. I’m thinking that if I shift my setup to the left a bit it could help marginally with the phase response, but marginally is better than nothing. The second measurement seems to...
  6. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Thankyou for your advice! Yes, the angled wall is seriously messing around with the phase response. I can’t think of a position that’s going to actually rein that in, except maybe moving the speakers around where the drum kit is currently. Nonetheless I don’t think it will help much as there...
  7. StraylionOfficial

    Polygonal - Asymmetrical "NIGHTMARE" Room

    Hello all! I posted about a week ago, criminally underprepared. So first off, my apologies. I’m going to start this fresh post with a diagram of the room: Oh yes.. I know… Far from ideal… Zero symmetry…. But since I’m not planning on moving from this house any time in the near future...
  8. StraylionOfficial

    Do these measurements and corrections look kosher to you?

    Thankyou Keith! I have edited the post to clarify as best I can. Regarding the high frequencies, does that mean I should cut off Dirac around say ~500hz? I'm just concerned about that dip around 2.5k I guess.. I appreciate the reply.
  9. StraylionOfficial

    Do these measurements and corrections look kosher to you?

    Hello all! Long time reader, first time poster here. About 4 months ago I took the dive and purchased Dirac Live RCS. I had just moved houses, upgraded to a new pair of monitors, and put all my acoustic treatments up. Anyway, I've been living with it since then and I can totally hear what its...
Back
Top Bottom