Search results

  1. HoberM

    Topping PA5 Review (Amplifier)

    mine start to shhhh and plooc after 3/4 months :(
  2. HoberM

    TOPPING Audio Interfaces Coming soon!

    As production is on going and the product availability is July, do you have some specs leak ? :) I mean attractive ones :) :)
  3. HoberM

    Yet another thread on USB interface recommendation (ADC for audio measurement system)

    Thank you. i've just read the audiolab measurements of id14 A bit odd no ? At dbu like M2 Amir's measurements the sinad is 79 ? https://cdn.l7audiolab.com/wp-content/uploads/2021/07/MaxGain-scaled.jpg
  4. HoberM

    Yet another thread on USB interface recommendation (ADC for audio measurement system)

    Hi Folks, I'm a audio hobbyist since 3/4 years now, and I'm looking for a new interface. I'm not into music production, but measurements :) I've already got : - Mic(s) for in room correction, for speakers drivers measurements and speaker conception - Turntable - Some custom cables for...
  5. HoberM

    Combining measurement methods to get a more accurate EQ - MMM + Gated Nearfield + Klippel Measurements

    Thanks you for the methodoloy. It's look like what I've read from pd0 et Bear. I'll try that soon I hope :) Did you checked the pre-ringing ?
  6. HoberM

    Combining measurement methods to get a more accurate EQ - MMM + Gated Nearfield + Klippel Measurements

    Hi Johnp98 ! I use a really similar method with very good results too! I use the "Jeff B." quasi anechoid measurements method, to get quasi-full polar reponse, and apply EQ as you do. Separing above and below schroeder FR. Targeting peaks (visible on multiples measurements around listenning...
Back
Top Bottom