Search results

Despite Hypex does not provide MTBF or failed modules ratios, what are your failure numbers, as a manufacturer selling these MP modules ? You surely have some stats, at least during warranty period ? This would be way more interesting and useful than links on random user stories :)

Imagine I am telling you Earth is not a sphere but instead a flat piece and that some others folks on internet are saying the same. Isn't good enough to convince you ? What you're claiming goes against what physics, electronics and mathematics tell us... Nevermind. Most important is that...

Can you provide scientific and logical reasoning backing this statement? Because, unless using voodoo, using my (limited) understanding of physics and acoustic, I cannot see any explanation for such statement...

Focal 936 minimum impedance is 2.8 ohms and stay under 4 ohms between 80Hz and 400Hz, according stereophile. The Crown XLS 2502 is specified to drive 2 ohms loads while the Yamaha is not

The audiophonics only supports 8A.

Arf, I did not remember (despite I also owned one previously) that the flex did not have a trigger out. Thus, forget what I said. In your case, I only see a master/slave power strip. These one has a configurable detection down to 8W on specs but was able to detect down to 5W with my Flex HT...

MiniDsp Flex(x) devices power consumption specs are not currently reflecting real ones. See this discussion. I was in the same situation ( but with a Flex HT). Master / slave power strips with wattage consumption detection is not reliable in this case with Flex HT devices. I ended up with a...

Zip thè files and upload thè zip archive

I would also opt for @boXem :) I love its rock solid audio sense implementation and his customer support. I currently own a boxer 5519/N3 (and before owned a boxem Arthur 3409/N2). I like Fred vision and care. The up side down module placement concept introduced with the "A" is interesting...

I usually buy stuff new and always have in mind the moment where I might sell it. And for sure , it influences my choice. When replacing an item, I never keep it as spare item and put it on sell straight away. I always sell items at half price of retail price despite these are in pure mint...

Experiencing issues here in France. For the past few weeks, randomly depending on the day and time of the day, page loading is delaying by random delay (up to 5-10 seconds)

There is no import tax on devices such a Flex in EU. You only have to pay your country VAT + DHL customs processing fees (around 15-20€ as DHL will collect VAT from you and do all the customs paperworks). See this post for detailed calculations:

Hi, Do you really needed a "better" dac? I doubt you would hear any difference.

It depends on the USB cable. For years I was using cheap 5m usb cables (for both mic and pc connections) with my minidsp devices (flex, flex ht) without issues. Unfortunately, as they got broken by a lovely pet, I got newer cheap ones (different models). Didn't work or randomly. Tried another...

Same here in France (not available). Seems BBC only accepts UK listeners :(

Minidsp Flex HT cannot and will not replace an AVR. It is not meant for that. In some circumstances (niche applications), it allows to remove an AVR from an AV stack. Which was my case but was a very specific use case. I had a mixed music and HT environment: - HT usage : AVR handling AV...

You're right about ARC . But I presume the feintech gets the hdmi data from my source (lpcm 5.1, no ARC involved), acts as an earc device and sends the audio stream to the flex via earc.

I don't use HDMI for music so I can't tell. I only use HDMI for AV streams. I have just checked: - With TV channels (DD 2.0) Flex HT reports 2 channels - With netflix and prime video (5.1), Flex HT reports 6 channels. Never got any glitches nor pops. Transition between formats and streams are...

On the feintech device, you can set the edid to auto, 2.0, 5.1 or 7.1. I have set it to 5.1 or 7.1, not auto. My source doing the decoding, it always send LPCM, maybe with a fixed format.

I use the flex HT for : - stereo music (toslink input) - TV/Movies (HDMI input) The Flex HT, as mentioned many times, supports only LPCM (up to 7.1) through eARC. As my AV source (internet provider TV box) is doing bitstream (including Atmos) decoding to LPCM 7.1 but not over eARC, I needed the...