Search results

Ah that’s great. Thank you again. Because one of the main reasons for getting the Fosi Audio ZA3’s is because they have XLR inputs and the Yamaha doesn’t - and I’m planning on buying a DAC that has XLR outs to connect to the Fosi Audio XLR ins just. Thank you so much. BTW - I’ve just finished...

Ah great. Thank you so much for your reply. So just to clarify, I would basically connect the output of the Yamaha WXC-50 with either a Toslink or coax cable to the input of the DAC which would send the signal from the music I’m streaming, directly through the Yamaha, bypassing internal DAC...

Hi all, I was just wondering, does anyone know if you can use the WXC-50 strictly as a streamer/pre amp and bypass the DAC, so that I can connect to another external DAC? I have a WXC-50 and am using it in pre-amp/streamer mode so I basically have the pre-amp out RCA’s going straight into a...

Thanks again for your detailed explanations and help. Much appreciated. Ok so my Jeff Bagby Kairos 2-way bookshelves with add on bass cabinets (that turn them into 3-ways), already have all the passive crossover components wired inside the cabinets. I don’t want to mess with that current...

Sorry but I’m still confused/lost. All this passive/active/dsp talk is a bit over my head. Are you saying your speakers have no crossovers in them at all and a crown xli800 amp powers and runs them, but then some software on your computer talks to the crown amp and tells it what frequencies to...

So you removed all the passive crossovers inside the bass module/cabinets? Or left them inside and connected to the internal terminals? And now you run a dsp to control what frequencies to send to the woofers?

Thanks for your feedback and response. So did you convert the bass modules to active by adding amps to them? Can you send me some more info on what you did and how you have them connected, running them with what, any changes u made/parts removed etc please? Thank you

Thanks again for your input and advice. Much appreciated.

Ah ok fair enough. Thanks again for your reply. Much appreciated. But if I went with a minidsp, I wouldn’t need to remove the passive crossovers?

Hi Rick, Thank you so much for your advice. Much appreciated. Yes I had a sneaky suspicion I might have to move the high pass filter from the bass cabinets, out, in order to reduce the lower frequencies from the mid driver in the 2-way Kairos - Very annoying and not really something I want to...

Hi there, I'm new to this forum so not sure if this is the right place to ask this question or request for help, but becuase I have Jeff Bagby's Kairo's and this forum talks about them, I thought it would be a good place to start. I built a pair of JB's Kairo 2-way bookshelves and then I also...