Search results

Yes. https://shop.zidoo.tv/collections/accessories-1/products/trigger-cable-for-eversolo-amp-f2-audio-power-amplifier-usb-a-to-3-5mm

When the subwoofer option is turned on, a high-pass filter corresponding to the cutoff frequency is applied to the L/R. But you can also switch to direct output full frequency signal for L/R. Likewise, the subwoofer can be switched to direct output, without using a cutoff frequency. There's even...

Did you try set the hdmi audio output to RAW or Auto? We tested some devices and no problem with multi-channel DSD for roon ready

Did you upgrade to 1.1.47? Switch to receive the beta version option. The multchannel Dsd supports for roon ready since v1.1.47

Only the Sub HDMI port(audio only) support multichannel DSD

It will take some time, the functions on the device have been developed. But the IOS and Android control applications are still under development. I believe it will be released in about a month.

Do not upgrade unofficial versions, which are internal versions used for streaming service certification and verification of other functions, and usually delete many functions.

Good news, DMP-A8 will soon launch a digital room correction function(EDRC) based on FIR Filter. DMP-A6 will launch a New digital volume algorithm EVC(Eversolo volume control) And new Integrations：Tune In/IDAGIO

Good news, DMP-A8 will soon launch a digital room correction function(EDRC) based on FIR Filter. DMP-A6 will launch a New digital volume algorithm EVC(Eversolo volume control) And new Integrations：Tune In/IDAGIO

ZIDOO UHD8000 support TIDAL Connect ATMOS via hdmi port output

Are you sure you know EVERSOLO products? A6 has 10-band GEQ and 15-band fully customizable PEQ, supports multiple profiles, and each port can select a different profile. DMP-A8 has built-in DSP and supports FIR filter import

DMP-A6/A8 support LMS(Squeeze connect)

Just return and download again.

Do not upgrade unofficial firmware. It is usually used for Certification of some services and will lack functionality.

In fact, we have massively expanded our R&D team. This time the firmware has some streaming service certifications that took a little long. But I think it will be fine within this month We are planning some interesting new features. For example, each channel has separately ten-band PEQ, as well...

We would love to integrate Chromecast audio built-in, unfortunately we contacted Google multiple times and got no response from the Google Team.

Gapless processing will only be used when the sampling rates are the same.

There will be a new firmware in May. Except with some new streaming services, I'm sure it will bring Gapless playback of CDs

We are integrating some new music streaming services, but I can't talk about it until certification is complete. There will also be some stability improvements and fixes. I believe there will be a new version within a month. Another major change is that We are developing a new digital volume...

2.44 does not have any changes that may affect the sound quality. Maybe turning on the Replay gain function outputs a different level than the previous firmware, affecting the listening experience? Usually when encounter unexplained problems, trying to factory reset is an option