Search results

For anyone who is wondering. I contacted the Topping Sales team to ask when they would be supplying European retailers with this product. They informed me that Scan was their main UK distributor and that I should contact them. After contacting the Scan sales team, they informed me that they had...

Yeah this looks like the best option tbh I'll give it a try.

Are the internals of the E1x2 and the E2x2 practically the same apart from the single XLR input and added USB-C connector at the back? Some of the specs on the website look the same but are worded differently so was unsure whether it still has the same stuff in it pretty much.

This was my suspicion, there seems to be a few options but no way to tell if they will be good or not, not many people talk about using them either. That sounds promising but looking at the site I have no idea what the differences are or what you would even do to get a cable I needed. I quite a...

Hi all, I am looking to create a really minimal setup which looks clean. I have an audio interface with an XLR port on the front. I know there are other audio interfaces that have them on the back now, but everything else about this audio interface was perfect for my needs so I will just have...

Thanks for a second opinion, as I spoke to a custom cable company about this and they said the TS to RCA cable would be fine for my needs, so I was starting to question the companys word.

Going back to this example then, which would be the correct cable from the diagrams pointed out in the previous post. Its either 10B or 16A just trying to understand when it is either of those? Or can you go with either.

I thought you could still plug in a TS cable into the TRS jack and it would just treat it as unbalanced? Is this not the case? You need to specifically use a TRS cable that goes to RCA.

Thank you for the in depth overview of gain staging and making me aware of the potential issues etc. It might just be easier to get the Topping E2x2 and plug my IEMs straight into there, then I wouldn't have to deal with any extra cables and fiddling with knobs. It would be a shame to let my...

Yeah he does some great videos. My issue with a lot of them is the XLR input being on the front of the device instead of the back. Looking more at some audio interfaces, the Audient Evo 4 looks great. It has a lot of features, I don't really care about my Mic sounding amazing, just decent is...

Thanks for the clarification. Given everything we've talked about, would you recommend any good audio interfaces? I'm looking for something around £200 more or less. With preferably XLR inputs on the back of the device, I think it looks a lot better. I only really need one for a mic, nothing...

I don't really understand what I would need to adapt here? I already have my IEMs connected to my Magni Unity, and all I need to do is connect the line out from the audio interface to the line in of the Magni using some RCA cables. How does the volume work when connected like this? Lets say...

Ok so for example the new Focusrite Gen4 Audio interfaces are a no go because they have an impedance of 50 ohms where as my IEMs have a low impedance of 20 ohms. So I'm looking more for something like the MOTU M2 which has an impedance of less than 1. As I was talking about before, if I just...

Hey all, I currently have a pair of XENNS Mangrid Tops and a Schiit Magni Unity (with DAC). Definitely overkill but they're so good. However, I am unable to use a Mic with this configuration, hence I am looking for an Audio Interface. I realised I could still use my Magni Unity if I connect...