Search results

Hi Dr. Please advise us as soon as you integrated this. I have been using your RooADi and Surface Dial and I'm very happy. Thanks!

A quick update! First, thank you all for your help and guidance and special thanks to @Doodski for introducing the wave generator which helped me track down my issue. I contacted KEF and and explained the situation, and they sent me a new driver within a week, free of charge, as I was still...

Hello Folks! I would like to see how can I improve my sub integration. My current set up is as follows: Preamp RME ADI-2 - Primary input: from USB - playing from ROON - Secondary input: Optical from TV - Output: XLR to Amp (NAD C298) Amp NAD C298 - Output: Speakers KEF LS50Meta - Sub...

I took another close look, I inserted a stick to see if I can move the foam and I noticed that foam is firmly attached inside, so I highly doubt it that foam had moved a a result of what happened. Maybe it was like this since I bought it? But I'm not sure maybe something else caused the...

Do you think something like this is covered under warranty? I'm afraid if I tell them the story (that I think they have been over driven) they say it's not cover under warranty. So if they wanna touch it assume they are gonna charge something close to the price of a new pair (when on sale). I...

Do you mean I should ignore it? I also thought LS50 frequency ranges is 75+ so 55HZ shouldn't be practical issue?

I look inside from the port, it seems that inside insulation (foam) has shifted to one side. Maybe this is a cause of vibration? I don't dare or even know how to open the speaker. I'm afraid it voids the warranty (or warranty might be useless nevertheless)?

I had put cushions foams (provided by manufacture) inside the port (as I'm using sub), I took them out I tried again and now I hear a crazy cabinet resonance at 55 HZ as if someone turned on a fan inside the cabinet. This does happen only with the deformed speakers. I'm not sure even if it's...

Just used this at moderate volume, I don't hear any buzzing noise when sliding right and left. Does this mean it's ok? What should I look for?

Today, I was changing cables and forgot to turn of the my amp, all of the sudden I heard a huge popping sound (I think my amp shorted). Later, I looked and I saw a shadow around the driver of my right LS50, the left one is intact. I haven't yet detect degradation in sound quality but I'm...

Could share some info about who did build it for you? I'm wondering how responsive is it? Do you experience any delay between when you turn the knob and when the volume changes ? Also, could you reprogram it to be used with any other infrared device if you later decide to change your devicev

I currently own NODE (Gen 3) and I'm interested in CX100 only for its display (to see the cover arts). I'm wondering if moving from NODE (optical output) to CX100 (or any other streamer such as Eversolo] while using external DAC (RME ADI) would result in any change in sound quality and in what...

That's not a bad news for me, because I'm happy with the quality of my Node so I was hoping to get the same, if not more. I just wanna buy CX100 for display and cover art purposes.

Upgrade would be relatively inexpensive for me (around $500) do you think still it's not worth it? I really like to see the album art and those new meters. So, generally speaking will I be seeing any sonic difference using optical? If it's par with my NODE (with optical) I'm happy. Also, can...

I currently use NODE (Gen 3) and I'm interested in CX100 only for its display. I'm wondering if moving from NODE (optical output) to CX100 (optical) [I am using RME AD1 DAC] would result in any change in sound quality and in what way? My current setup: RME - ADI2 (preamp, and DAC) NAD C298...

How to I know if the voltage is high or not? I connected NODE to feed RME, and this is all my setup. Btw, what S/N stands for?

Hello folks, I am using RME ADI-2 FS as a DAC/Preamp feeding my power amp NAD C298. My amp has a gain control from -20dB to 0dB. In my current setting, I kept the amp gain at 0 and my RME volume is around -40 to -50 db. Im wondering if it’s better to lower the gain in my amp and increase the...

From rubber feet (sorry for misspelling) mean those round small rubbers that come with LS50Meta to be used when you don’t bolt them. What I meant was that do you see any difference in sound quality when you bolt them vs. when you don’t bolt and place them on the stand standing on their own...

Interesting that I had the same logic, when purchasing them (told myself that KEF engineers intended this for bolting and they are not crazy to design it otherwise). Background; Prior to this stand I had B&W STAV24 S2. Once I placed my LS50META with original padding on S2 I was amazed, how...