Search results

I use it, it smooths out the bass but i would have liked it to have highs and lows adjustmnents after using ypao, not just for a subwoofer, meaning like a studio monitor -1db 0db and +1 db across a wide range lets say 100hz down to 20 hz or 10-20 khz for the highs Like i have a big room i want...

Shouldn't the user review have have been posted here ?? https://www.audiosciencereview.com/forum/index.php?forums/amplifiers-phono-preamp-and-analog-audio-review.13/

Now i have one Yamaha R-N800A

1.18 not 1.12

https://www.whathifi.com/reviews/yamaha-r-n800a

Nice, i bought a Yamaha A-S800A

Same amp in the Yamaha R-N800A ? (same specs with only a very little difference in distortion)

Looks like this is the first edtion, very accurate measurements https://www.soundstagenetwork.com/index.php?option=com_content&view=article&id=2667:nad-c700-integrated-amplifier-dac&catid=97:amplifier-measurements&Itemid=154

Whole point with dsp like lyngdorf and for surround sound, is to get most out of the system if you can't sound dampening,improve room acoustics (you don't own your house,appartment or have no clue at all what to use for sound dampening,improved room acoustics) or already have done it but stil...

you have this cheap option, i would buy one if i needed one won't brake the bank and if you only gonna use it less than 10 times (different speaker or room) with a new phone (motorola g84) i have both options...

As i remember the eq on a wiim amp isn't that good, rather disappointing

Most avr can play 50 watt in all channel 5 or 7 but bi amped it it might control the speakers better I doubt it used all of the current,power (not wattage) when only playing 2x50 watt, would be amazing having 2x50 watt but the amp using the power it has when playing 350 watt (most avr's are 7...

mabye an avr would makes sense if i could bi amp my speakers (most avr can do it) and had 2 subs, i don't

Nad C 700 V2 has it from early 2025

not 100% correctly There is sub out and preout,main in Nad usually have a sub out If for some reason i wanna have dsp i want one unit to avoid extra cable and power cable

yes but only once

NO pre out main in

NO (i have no upper limit of 2000 euros, did i have 2000 euros for an amp i would go out and listen then ask for advice) As mention in another reply i listen to lyngdorf and higher tier speakers last weekend (some of them connected to a nad c399) I earlier this week tried to google 2 channel...

I have no budget, i listen to lyngdorf and radiant 6.2 with a nad c399 last weekend The lyngdorf amps have RoomPerfect,dsp but just about 2000 euros is alot for me (wiim amp 500 euros), i know a wiim amp pro has dsp,that is the only inexpensive 2 channel amp with dsp i know of, everything...

To get the best sound out of your room and what hifi components you have