Search results

Same here using EU version on PC with ADUM4160 isolator to drive HD599. %30 volume is more than enough for me

Hello currently I am using Elac DB52 with wiimamp and SB1000 and looking for speaker upgrade. My budget is 500-600 Euros per pair and I don't care about low extension. 5 inch might be even better for the space constraints but 6 inch also fine. Currently I have below options in mind and looking...

Subwoofer output is low pass filtered around 200hz so no need to use y cable Loxjie A30 is not that powerful but great sounding so in order to use its power wisely you need high pass filter, luckily as far as I know svs has high pass at 80hz from output RCA's I think it will be worth to give...

Hello I also have same unit but never experienced such thing is it same while changing volume via remote maybe it is collecting some static from your hand?

I am kind of new to this hoppy and really curious about something. I had a pioneer vsx 323 avr and recently switched to loxjie a30. Vsx 323 is an avr with a lot of going on inside with DSP, hdmi board etc with a linear power sup and class ab afficiency it is rated 100watt at 6 ohm *5 channel...

How it is driving DBR62s? Is it ok? I am also planning to use my loxjie A30 with dbr62 currently using db52

I have the same with moode with a good DAC also using Camilla via upnp

This is what I used on moode with loxjie a30 on direct mode, speakers are like 10 degree toe out and like 15-20 cm to wall, Tidal Hires Flac via Bubble UPNP to Moode

I am using latest moode 64 bit on pi zero 2w with LG HiFi plus usb DAC tidal connect working perfectly just returned wiim mini as my DAC is way better https://github.com/GioF71/tidal-connect you can install using this guide easily, it is also support mqa both software unfolding and direct...

Thanks for the explanation

Hello I am curious of something currently I am using Tidal ~ Rasp 2W Moode~ LG HiFi Plus ~ RCA in Loxjie A30. Loxjie Analog has 85db Sinad , LG HiFi Plus has 106db Sinad both has tested by Amir. I am feeding Debut 5.2. As Sinad is at the end a kind of noise how should I read this as a total...

Hello sub out is working properly with volume control etc right? I am also thinking to add a sub to my debut 5.2

Does remote working angles are better? Also I have debut 5.2 as you , when I pushed ao300 to volume 35-36 (optical input fixed volume wiim tidal connect) woofer is start to fall apart making cracking noise and heavy distortion in bass heavy songs it is like if I push it to 40 it will blow and at...

Mine is also from Aoshida via Amazon.de, AO300 is Aoshida exclusive anyway

I expect the same implantation as Loxjie as they are under the same manufacturer

Loxjie and SMSL is under the same company they are making AL200 , putting some more input producing AO300 for Aoshida exclusive, now putting phono in and release it under Loxjie A40 internals should be similar if not the same, grap what is available and cheaper. I wish instead of releasing same...

The only problem for me is optical input sliding right side as you can see from the pic only one screw is holding it and it is just at the very end left side ( very strange design choice) so when I try to put optical cable slot sliding to other side I just sanded cable a bit in order to slide it...

Many thanks mate I just packed the whole thing and decided to stick with al200 due to pops while changing inputs and sample rates just before leaving to DHL I saw this post and updated in 5min now it is dead silent nothing heard on/off changing inputs or sample rates now packing al200 to return...