Search results

In this case i should take the lfe channel outpout from a DAC , let's say the TOPPING DM7 (because at this point 8 channel would be enough) and enter into the analog input of the miniDSP Flex? So i'll use only 1 channel for LFE , the Flex will take care of the 4,6 or 8 sub's....and i'll still...

Which practical problem did you think , someone, could find following this path?

Yes, let's say, i want to use Ravenna...what i should do in Windows?

I mean instead of Dante protocol, let's say I need to use a motu or a ferrofish... Which is the configuration I should follow on windows to let the HTPC work with that specific DAC?

In a system like that 7.6 or 7.8, how you'll manage the BEQ filters? Which device could be used to send the filters to all the subs?

So you are using MAD to be able to convoy your channel through ravenna... In the case of a different protocol, there are particular driver to use? On the HTPC?

And in that case the HTPC will be connected through usb to this DAC? What are the difficulties of this? Driver configuration in Windows?

How? Could you please explain your setup?

It's all correct but let's think to a system without atmos to eliminate one big variable from the problem.. With an interface like rme https://www.rme-audio.de/m-32-m-16-da.html it could be possible to. Manage a system with6/8 subs and DLBC? The solution that jhenderson0107.33049 proposed...

As I sad, let's forget about atmos, also because Italian multichannel movie tracks in atmos are very rare With motu for a "normal" 7.6 system what will be the hardest challenge?

In that case the motu will be connected to. My htpc through thunderbolt... After the motu signal then, going directly to the amplifiers? So in a solution like this, what will be the main challenge?

You're talking about input sensitivity? Agree, but you are not considering the headrythat 6 sub's add to the system..

Can you show me some of those? Which avr do you suggest for this kind of application? Also I think we must be aware of output voltage of the avr... In order to supply the necessary voltage to the pro amplifiers... This is a matter where I'll become really confused

This is what I really don't need, I wish to have something semi automatic that could measure and correct. That's why I was looking at Dirac

What about the rme m-16 ad, or something similar? In that case, the rme should be connected with the htpc how? Regarding Dirac DLBC is designed for multisub purpose, so I think the channel configuration will not be so hard..

Seems another good strategy... Sorry for the ignorant question, what is MSO? And it's easy to use? The idea of DLBC is there e cause it will take all on this own.. And it's very easy procedure

So in this case DBLC will se 4 pair of subs? What if I don't need atmos? Then it will be easier?

What is the hardest part of this? I mean with an htpc and a 16channel pro dac.. What is the thing to be aware of? The DAC solution, i suppose it's better from a quality point of view, and at least I wish to have 6 subs.... Headroom is never enough...

What do you mean?

Ok but if you want to do a 7.6 system.... (8 sub's) to work with DLBC you are forced to go into a multichannel dac with at least 16 channels..