Search results

Hi, i'm new to speaker building and wanted to understand a bit more about curves in vituixcad, to be precise i have this tang band w6 2100 and if i put it into a closed box of about 16 liters ( the vas of the driver is about 16 liters) i get this response ( black line in the SPL graph), but if i...

the graph for the air velocity is this one, the driver is rated for 55W rms so i used that value as reference, also at that value it plays at around 98db. to avoid resonance can't i just cut the driver at around 100Hz?

Thank you for the response, i agree that generally under 40-30hz there isn't much information anyway and i think i am going to build two boxes, the one tuned to 22hz and maybe a closed one or a bass reflex one tuned to 35-40hz. When you say "useful output" what do you exactly mean, based on the...

Hi, why is that so?

The Hi, MaxSPL should be this graph.

I have a tang band w6 2100 woofer and i'd like to build an enclosure for it. I did plot the sub on winISD and on Basta! and was able to get the sub to play down to 21 hz at -3db with a 28 liter enclouser and a port tuned to 22.5 hz, the port adds to the enclosure about 3 liters (7cm diameter *...