Search results

Have you checked out our Smart IP FAQ and 4430A operating manuals yet? https://assets.ctfassets.net/4zjnzn055a4v/645EyeQhfGzdryNZYU8RhT/9d52f1bca96747f8efb8b74a27e1ab60/2024_Genelec_Smart_IP_FAQ.pdf You need the Dante Controller to set up the IP streams and Genelec Smart IP Manager to configure...

They measure practically identical to the 8330A SAM monitors.

There has been some discussion but I can't confirm anything yet.

I am not sure what exactly is "them" but Genelec S360 is not using an OEM coax driver. It has a 44 mm/1.7" dome compression driver with a 25 mm/1" throat in our custom DCW (machined directly into MDF cabinet), paired with a 10" woofer in non-coaxial arrangement. There is no Genelec model using...

It depends if you want to speak English or Finnish. In English it is pronounced with a soft G and in Finnish it is pronounced with a hard G, and both are equally correct. :)

The issue might be that in Finnish language letter e is pronounced almost the same as the letter a in English language. To my ears both the woman in the link and Paul on the ad video are saying it as Ge-ne-lec. Your American ears may hear it otherwise and we just have to accept that.

It was already posted some time ago. https://forvo.com/word/genelec/

I am sorry but it is indeed Ge-ne-lec, no matter the language or location. That Sweetwater video of Paul is about 10 years old and he was quite new to the company back then. I am sure his pronunciation has got better since. :)

No, that is not true. Here is the real story behind the 8351 offset LED. Back when we were developing the original 8351A, we were debating which is the "default" orientation for the speaker which would be indicated by the orientation and placement of the GENELEC logo along with the LED. During...

Yes, that is correct. All the error and warning events are still shown even though using the LED disable option.

You can see 99% from these graphs. There isn't anything magical happening beyond the 180 deg planes. The same measurement data is used to create the GLL file, it is not a separate data set. Btw, isn't this 8361A thread?

What do you expect to see in the GLL data that isn't already visible in the directivity data that is available? GLL does not contain any maximum SPL or distortion data, if those are what you are after.

Our 4400 series monitors do not work with GLM but they have their own Smart IP Manager software instead. It provides very similar room equalization features and processing power as the GLM, but without the automated room measurement capability. The installer or the end user can use an external...

Hi all, This thread was brought up to my knowledge by a colleague here at Genelec. It was obvious to us that the tweeter polarity issue and the resulted bad frequency response could not have passed our production quality check, but I needed to dig up some old data to be able to prove it. I sent...

Nearly 20 years ago! :oops: I did my tests around 2005-2007. I have been thinking about reposting all the data here since the original threads are long gone. Would you like to see my old measurements being posted here? I think there were around 50 subs total, both commercial and DIY. o_O

Naturally it will support every existing Smart Active Monitor and subwoofer.

Genelec to launch UNIO Audio Monitoring Platform and 9320A Reference Controller at IBC New 9320A Reference Controller provides a single touch point to Genelec’s UNIO Service Platform, plus a wealth of integrated in-room and headphone monitoring features. Iisalmi, Finland, September...

It will be added there soon.

I am not aware of any independent research, but perhaps @Thomas Lund can chime in as he is our resident expert on this subject. The claim I made is based on our internal listening tests, as well as many customer experiences while listening The Ones monitors with linearized phase response.

Yes we will. As soon as possible.