Search results

Like I said, the one posted here is NOT the one we released for the E50 :) So no it would look way different :) 4th order is of course a lot of parts, but what I mean with it, is that its a type you just see very often used. The one we ended up with where 1th / 3th order

Hehe yeah :D Well no, it could not be perfect due to the design of the cabinet design, so making it look like it does, is already a small compromise. This data shown here was the best looking measurements of all the crossover designs we did, but was not what we ended up with :)

Hi All! happy to see that there are some discussion about our new E50 speakers in here. Regarding the talk about the stained black might be veneer since it does not have the finger joints? It's still solid wood, all of them are and will be for future finishes as well. If you do not like the...

X Purifi for the extented linear stroke

Thank you so much for this, it's really appreciated. We do have A10 going to Erin's audio corner shortly, I hope he would also have the time to do some tests on the different tunings. I would also say that if you didn't know about the Mastertunings when doing the measurements. It's a valid...

Thank you for such a kind reply, that is rare to see in online communities where the tone is usually harsh, big respect! If you still have the A10s, it would be great to see you do measurements on the "S400 simulation" mastertuning and the "nearfield" (which we see nearly all customers end up...

Thanks for taking the time to measure them and provide your comments. I feel your evaluation is overly critical considering the speakers' intended purpose. If you had taken into account the entire package and what we offer, the perspective might change significantly. This speaker wasn't...

Soon!. we have everything ready, it's just a question of building them, and tuning which have been in the works for some time already

yeah we for sure sit with an golden opportunity to blind test and let people judge in known involvements as fast or slow they would like. it's about 20 sec to swap mastertunings. the warm tuning does have some more bass in some areas, but generally it have less as it does cut off sooner than...

sorry for the late response here. not that often I log in here. our warm tuning, or the stock for that matter looks pretty similar to each other, and when only looking at measurements, it's looking kind of "off" which I agree with. this is work done by a completely different designer compared...

Regarding the heat of the backplates. They do get warm to the touch yes. We did extensive test after the first batch as this did have potential heat autoshutdown happen for a few customers. Here the speakers would not be able to power on for one hour. This happens at 80 degrees Celsius, where...

The mastertunings is the speakers design, it's a big part of it as this is where the magic happens. The speakers themself are to be seen as a platform that we can do a ton of things with, depending on what the customer needs and want. As low THD is clearly important to some, we did a completely...

Hi everybody. Just to shortly comment on the THD. The numbers are high in the lower frequencies as we utilize the movement on the woofers on the standard tunings that would make them work for the 25hz. Especially since we use sealed cabinets, they need to work harder for that. If you look...

We will actually do an option to get 2 or 3 years additional at 200 EUR. Even though all components are rated to withstand full power for 4 hours a day in 10 years we should be fairly confident providing 10 Years on the electronics, but with all we have been consulting with, all advised us to go...

Our main points to this discussion are not so much about our S400 speaker, more about the use of the NFS, which we also feel most readers are interested in. Therefore: 1. Since NFS will show the actual dispersion pattern at the calculated distance, our recommendation would still be to use...

Sorry, but I need to correct your understanding of the visualization tool here. All data of the visualization tool are shown as they are at the actual shown distance. The only exceptions are: Sensitivity data, which is referenced from 10m SPL curve to 1m distance. Below is the headline of...

Sorry, but No. This is not right. The NFS will not just assume same result at any distance, this is the essence of the system, that when you move to different distance, you get NEW results. We can show that easily by showing you our 2m vertical contour plot and same contour plot at 66cm distance...

Buchardt comments on the design and data presented To comment on the results showed by Amir, it is for a start important to know that every speaker design comes with a lot of compromises. The true art of designing a loudspeaker is to engineer ways so that the amount of compromises becomes as...

Oh yeah not having English as the first language can result in misunderstandings, would not be the first time that happened haha We do stripe to be as good as possible when it comes to price / performance ratio, and if that's the most important factor, then our s300 is the winner, but it's...

No i would not think so. You can say that the bass performance looks way better in these mesurements compared to our own hah :D