Search results

Unfortunately, if it works like that, it won't work in my application. I hoped that the sub output would also work without a filter, and that the subwoofer itself would filter. Sabaja's crossover frequency of 70 Hz is too high, hecos can play really low.

I'm thinking about buying a subwoofer for my Sabaj a30a... It will play in tandem with the Heco Aurora 700, although after playing with eq laudnes at level 5, I don't know anymore. Do I understand correctly that the sub output in Sabaj only works with a filter? I would like to set filtering on...

Can you force the overload system to work? Have other Sabaj A30a owners ever experienced this reaction?

In my case, it looks like overload protection, not thermal protection. It will amplify the amplifier when it is just turned on, cold, and as soon as the distortion level reaches 1%, it cuts off the channels. So far, I haven't noticed anything happening due to the operating temperature, the fan...

Yes, Heco Aurora has a rated power of 200 W and 300 Max. As I saw in the photos, the speakers are well ventilated and the tweeter is cooled in oil? The efficiency given by the manufacturer is very optimistic... 92dB... I don't know, somewhere in the review I found 89 measured. However, these are...

I usually listen at about 36 on the scale, in a room of about 34 m2 and this is the optimal value for me. Plays louder in order of the quietest of the recently tested... Loxjie a40, pioneer a-30k, WIIM AMP ... I didn't test the yamaha s300 or s500 for a long time, because the sound just didn't...

I didn't notice any delays with HDMI, it also seems to work well with the phone via USB OTG, the LDAC Bluetooth responds immediately and is of great quality.

Software version 1.12. I think I got a new unit. The reset was done, the sheet metal in the terminals was bent and tightened as much as I could. Simply, what I previously considered to be clean sound with a class a/b amplifier was definitely not clean, recently it was the Pioneer A30-K, in tests...

Sabaj loses channels right around 80 on the scale. Of course, if I lower the source level below the maximum, I can set the amplifier to more than 80. I think this is simply the maximum power. There are factory plates in the columns, does it have a big impact? The cables are not super familiar...

I also purchased a Sabaj A30A. It works with Heco Aurora 700. I just have doubts whether it works properly. From about 80 on the scale it cuts off the left or right channel or both... Restarting prevents playback. Is this how overload protection works? How is it with you? I would like to point...

For me it's eco-friendly. I haven't tried connecting it to a PC, but with USB OTG I haven't had such a problem. Honestly, is this a game with LDAC that requires using USB OTG? Man 41 years old, am I already deaf? I have been listening to and appreciating equipment for over 20 years.

Yes, I'm afraid I might make it worse. So far, I haven't found any problems with the quality of workmanship in the Loxjie A40. Will the Fosi Za3 be noticeably stronger in terms of power? Heco Aurora 700 supposedly have an impedance of 8 Ohm, but tests show that it is more like 4 Ohm. Can I find...

Hello Colleagues. I wanted to try a class D amplifier. First, I bought the much praised WiiM Amp... I don't know, very good functionality, but for me it simply sounds too dry and rough at higher volumes. What's more, from Amaz... I just got used equipment and the power supply was still making...