Search results

  1. M

    16 channel vu meter

    yeap camilladsp is outputting 20 channels and 18i20 is DAC'ing them, though currently there are only 6 in use
  2. M

    16 channel vu meter

    basically
  3. M

    16 channel vu meter

    the array itself is 12 though :P
  4. M

    16 channel vu meter

    ye but its just a case, its mostly empty, it has 36V 600W psu in it and https://store.sure-electronics.com/product/114 this amp
  5. M

    16 channel vu meter

    Hello, I am back again with another whacky creation so let me get to the point, hope you enjoy!: Q&A: How? I fetch the volume level from camilladsp over websocket, which gives me level per channel, and then feed that over serial to arduino pro micro, which then talks to the PCA9685 in order...
  6. M

    Entire home audio setup

    So yeah this will be my last entry. I've bought raspberry pi zero 2 w and camilladsp installation via the linked script went flawlessly and now i got it room corrected. Thats all I wanted synchronised and room corrected and now i can just copy paste same setup into other rooms. pi zero 2 w is...
  7. M

    5.1 Home theatre on apple dongles for that sweet sweet audiophile gore

    I would consider getting cheap AV Receiver with preouts, that will do the job. Apple dongles are not synced together and while i didn't have any issue whatsoever it still remains. To route audio, I used alsa (yes linux), but if thats over your head i would just stick to cheap avr that will do...
  8. M

    Entire home audio setup

    So the rpi zero w. It's working fine, i had to use different psu for it because when i was using step down from the 20V psu, it was introducing large amount of noise. And about camilladsp, I spent over 10h trying to get it to work. While doing it manually camilladsp constantly had underrun for...
  9. M

    Entire home audio setup

    So update, adding camilladsp to the picoreplayer is bit of a pain but doable. LMS has DSP plugin based on camilladsp but it wasn't working at all. After talking with some people about speaker for bathroom, I got recommended cornered audio ci2, which is like $75 per speaker instead of $50 budget...
  10. M

    Entire home audio setup

    I just tested with single receiver in different room and one receiver on my pc and holy heck guys this is going to work, its perfectly in sync. Now I can add my HT as a receiver and then i need two or three more that i'll have to figure out speakers for, but setup works!
  11. M

    Entire home audio setup

    Entire point of this setup is not to modify flat that i don't own :D so have to be standalone speakers. Otherwise i would just wire some PA setup and be done with single player lol
  12. M

    Entire home audio setup

    Update, sorry for tiny bit necrobumping but here's what i've learned As per link above, I've tried what the guy tried. esp32-squeezelite with esp32-audio-kit and TDA7498 amp, with some speaker. First i just tried the headphone out on my headphones and oh boi. The audio quality is atrocious...
  13. M

    Entire home audio setup

    I just found this https://github.com/kidwellj/multi-room-hifi which describes perfectly what i need and heck they even reference this forum :D As to speaker i think i'll look for some cheap, small, passive center channels
  14. M

    Help me understand line voltage please

    I'm talking about RCA/XLR line out/in. But from the beginning I have home theatre setup with adam t5v as LR, amp for the rest of the speakers and Asus Xonar u7 mk2 dac. At first there was issue where t5v's weren't getting loud enough at full volume on the DAC so i bought some cheap chinese...
  15. M

    Sub recommendations to pair with Edifier MR4

    yeah 80 is too low i think 120Hz looking at mr4's FR
  16. M

    Sub recommendations to pair with Edifier MR4

    no, edifier i mentioned it in this thread
  17. M

    Sub recommendations to pair with Edifier MR4

    Hmm looks interesting, since The t5 has passthrough i could just buy highpass, i will look around if i can find something similar thanks!
  18. M

    Sub recommendations to pair with Edifier MR4

    This page looks so horrifyingly 1980's that i wouldn't buy anything from there i don't even know whats what lol
  19. M

    Sub recommendations to pair with Edifier MR4

    Can you provide me with example? couldn't find any
  20. M

    Sub recommendations to pair with Edifier MR4

    the crossover doesn't have to be on subwoofer but at the same time i don't want to spend the same amount i spent on dac to achieve crossover honestly i'm thinking of using mobo line out for subwoofer and doing the crossover in software, there probably won't be any audible diff
Back
Top Bottom