Search results

I was usually running high gain at around -27 give or take on average. I'd push it a bit depending on the tracks and my mood. The problem I 'perceived' was when I really pushed it a bit with tracks that had a healthy dose of bass and lots of other things going on, up to -10 or higher for short...

And here I thought the Gear Acquisition Syndrome would go away after I took a break from photography. Nope, it's quite alive and well...

There's also the possibility I have a dud DX3 Pro+, or the possibility I'm imagining it all to justify a new amp purchase. :D Now I "need" the matching DAC to go with the A30 Pro. Lol.

Again, I'm hoping it's not all in my head. :p If you look at the Amir's graph for the Dx3 Pro+, it does have a decent amount of power at 32 ohms like you said, but at 12 ohms, it drops quickly to around 213 mW give or take. Although Amir didn't provide information down to 12 Ohms for for the...

I'm finding, after the initial honeymoon period has worn off, that my Aeon Closed X was lacking something. Couldn't put my finger on it for days. Kept trying different EQ corrections from Oratory1990, Robbo99999, this thread, and everything in between. Just couldn't balance it out for some...

My bad. I've always used APO with Peace. Didn't even think of going through APO directly. :facepalm: Well, if someone wants the Peace files, they're there... Thanks again!!!

If anyone wants, here are the fixed corrections with the shelves for importing into EQ APO+PEACE.

Absolutely! Could be any or all of the above. Regardless, I find them quite pleasing after a week of use, though a little bright for me as I'm sensitive to treble. An added -2db shelf at 8k with a Q of 1 seems to do the trick on top of the sample 2 correction. I've also noticed that the...

I got mine last week and the first time I put them on, I thought I'd have to return them for the lack of bass. Never believed in breaking in headphones, but then I saw the the included tuning guide and DCA's own recommendation for a burn-in period. Suffice it to say, a week later, I'm actually...

I found these that work well, providing you have a horizontal surface to mount them to. Like the rounded profile to spread out the load on the headband. https://www.amazon.ca/gp/product/B08S3GDGV5/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Thanks for the replies. I should have done a search through the thread. :facepalm: What really bugs me about this is that it's a common mechanical fault. If I put downward pressure on the knob while increasing volume, it registers fine. Annoying to the degree that I've returned my unit...

Just received my DX3 Pro+ and I'm wondering if anyone else has a slight problem with their volume knob. Reducing volume works fine with every click dropping a dB. Raising volume however will sometimes register a dB increase per click, and sometimes not. If I spin it multiple clicks up, it...