Search results

im not a dream breaker, so keep on dreaming dorothy.....

that suppose to be a cleaver reply?

way to price pricy for what it is and what it gives....

and i found this too... Voltage to dB Converter | AE Techron so in my caculation in i -2.00 the XLR uses 4.13V tha works on my speakers at least stable! the sad thing cant make the precise values due to the 0.5 volume steps on the dac but its ok. :P

well math is not my strength:p with a help of a member i got this 20*log10(4.1/5.2)=-2.06db so -2.00db for 4.1V and i found this too... https://www.aetechron.com/calculator-Volt2dB.shtml so in my caculation in i -2.00 the XLR uses 4.13V tha works on my speakers at least stable! the sad thing...

thank you once again!!!!!!!

20*log10(4.2/5.2)=-1.85 for 4.2V 20*log10(4.1/5.2)=-2.06 for 4.1V 20*log10(4/5.2)=-2.27 for 4.1V i edit it, to may help others too... hope i done it right you are the best! thank you so much!

and if its 4.1V? to be sure because toppings 4.1V works in my case cant set it to -2.33dB so -2.50db for 4V

hello. i have the DO400 and i love it so far, i pair it the Airpulse A300 speakers using XL:R and seem the i have some clipping higher than -1.0db so i use -2.0 to be sure and sound clean and nice! i suppose the speakers dont support 5V but on Topping D90SE i was used in the past had a setting...

hello. i have the DO400 and i love it so far, i pair it the Airpulse A300 speakers using XL:R and seem the i have some clipping higher than -1.0db so i use -2.0 to be sure and sound clean and nice! i suppose the speakers dont support 5V but on Topping D90SE i was used in the past there a setting...

hello. i have the DO400 and i love it so far, i pair it the Airpulse A300 speakers using XL:R and seem the i have some clipping higher than -1.0db so i use -2.0 to be sure and sound clean and nice! i suppose the speakers dont support 5V but on Topping D90SE i was used in the past there a setting...

sounds awful with 100% volume or bitperfect and the worst part is all 2 K9s has this problem.... from K7 and down the Volts on RCAs are normal! i send em mail messages posts...i done it all i hope they listen! dont know if other have this problem or even notice it... but its a vital issue needs...

hello! may i bring a problem i have with the K9 PRO ESS? K9 PRO ESS distorted my Speakers (AirPulse A300) but Topping D90SE not. at topping i can select 4v and 5v, at 4v all works clean, at 5v i have distortion at my speakers with K9 PRO ESS i have the same distortion i had with 5v at...