Search results

Hello! As far as I know, D+M AVR/Ps have only 2 speaker presets available. No idea about how it works with Dirac, only tried it with Audyssey,

If I recall correctly, OCA has covered it on some of his videos on previous versions of his calibration tools, so I'd start looking there! You will also find some of the settings you should use in REW on the Nexus Changelogs, though the sweeps you'll be able to use depend a lot on your system...

Fair point. Actually have no idea if it does or doesn't. Good that you brought that up. Also a fair observation! I still did some of OCA's manual configurations, without having any idea of what I was doing. Would just follow the steps on the YouTube tutorials and hope for the best. Since then...

An AVR is a complicated device and room correction for 7.0 setups will hardly be a breezy process, regardless of using either this or another AVR/room correction software. There is always a slight learning curve to deal with in any new device / system, in order to understand the menu structure...

https://www.finnishdesignshop.com/en-pt/leisure/home-electronics/hifi-audio Some deals here on several Genelec items (20% off).

It depends. If you have a measurement mic like Umik, you should start directly with Nexus. If you don't have one, and use Audyssey's mic that comes with the AVR, you can either do Nexus or A1 Evo Maestro. I haven't tried Evo Maestro, only previous versions and now Nexus. If you know the basics...

Most welcome. It's pretty much the same process for 2.2, you just need to make less measurements. It's worth to check the video once in order to understand the basics of it, though it really is a quite simple and fast process. Can't comment on .2 calibration as I only have one sub, though I have...

Speakers (front ported) are roughly the same distance from backwall, though yes, FR is 60cm from side wall, while FL has a piece of furniture around 40cm from it. Anyway, I was wondering if this was the reason why I was getting inconsistent sub polarity settings through different version of...

I believe OCA mentions in the Centering Mic section of the tutorial video that if each speaker is reaching the 100 mark on different (positive/negative) parts of the chart, they have different polarity. I've anyway done the battery test on both, and both turned out correctly, so shouldn't be a...

@OCA Hi! Here to ask for some advice again. I'm remeasuring my system, starting from scratch. On the very fist measurements to fine tune microphone position between LR speakers, I've noticed what seems to be different polarity on L and R. I did check and recheck the wiring and all seems to be...

Hi. Latest version is Nexus as @antcollinet pointed out. If you're familiar with rew measurements, it should be pretty straightforward to set it, and so far I'm really happy with what I've been getting out of OCAs calibration methods. Adding to the videos, I would also recommend going through...

@OCA Hi again Serko. Couple of questions I'd like your advice on best procedures: 1. I have significant master volume variations when listening to music (mostly streamed, via Spotify/Tidal connect) and movies (source is android tv box). Usually AVR is set between -40db to -35db for music, and...

Got it! Thank you. Currently got both uploaded to the AVR so will spend some time listening to them, on both music and movies. Attached some after cal measurements Nexus 2.4 unticked (1_LFE+Main.jpg) Nexus 2.4 Force Small (2_Small.jpg) – Calculated crossover at 80hz EDIT: Not sure if this is...

Hi Serko! Thank you for your great work. I was previously running a version of Evo, and recently made my first attempt with Nexus on 1.8. Currently running version 2.4. I did get some strange SW distances from Nexus 2.4, more precisely 5.37m if I leave all checkmarks unticked which sets Front...

Completely agree! Thank you for adding this chart to the conversation. Upgrading to XT32, as in better room correction, was my main reason to upgrade from x1700 to x3800. My previous comment was directed to the OP, sharing my experience on the same AVR upgrade, with very unscientific...

Recently upgraded from X1700h to X3800 to run a 5.1 system. Being completely honest, barely noticed any differences using Audyssey Calibration + app, yet I managed a good deal and wanted XT32 + pre outs, in case I decide to change some things in the future. I did notice a huge difference in...