Search results

Good Morning.After several years I would like to change a my Electrocompaniet ECI 2 amplifier.I would like something with more dinamics.The speaker are home-built with Seas and Skan Speak components with an impedance of 3 ohm at 20 hz,up to 4 ohm at 20khz.What do I think do you recommend?Thanks

isEsimo

Ho effettuato le misurazioni in camera dei miei altoparlanti. Devo esportare le misure da REW. Entrambi pre un pannello in cui mi chiede con quale risoluzione (PPO) e con quale smoothing,ho bisogno di esportarli.

The measurement in the room of my speakers. After DRC's help I will make a filter. Thank you

La misura della stanza dei miei altoparlanti. Che poi darò alla DRC che mi farà un filtro.

When should I export the measurement as text, in what resolution? How many PPOs? With what smoothing? Thanks

Buongiorno, un consiglio tecnico. Quale filtro fareste nella configurazione d'Appolito (perché il cabinet è già fatto) in bass reflex, con questi tre diffusori. 2 woofer Seas CA 18 RNX, 1 tweeter VIFA XT25 TG. Tubo reflex Monacor MBR 75.

Ho controllato la parte audio del PC, ma non ho trovato nulla che potesse influire sul suono.

Queste sono tre misurazioni del mio canale L. Con il microfono Umik 1 nella stessa posizione. Quello nero fatto con Audiolab Mdac Dac. Quello rosso fatto con Topping E30 Dac. Quello blu fatto senza DAC, cioè usando l'uscita cuffie del portatile, collegato direttamente all'amplificatore. Perché...

The delay I'm talking about is the one between the speaker and the measurement microphone

Una domanda per gli esperti di REW. Quando misuro i canali separatamente, il ritardo deve essere lo stesso per entrambi i canali. Ma quando misuro i 2 canali insieme, quanto dovrebbe essere il ritardo? Translated by moderator. Please post in English going forward. A question for the REW...

So in operation they become 0.47 amps, while in stand by they are 0.28 amps. Right?

I wanted to ask you. Is the stand by of the Topping E30 (with the orange dot that remains lit) a necessity (i.e. to keep the circuits in voltage/temperature) or I can disconnect the power and nothing changes in terms of sound. Thanks

To get the maximum power from the L50, do you need to use unbalanced inputs and outputs, or the balanced one? Thanks

Where did you see the D30 III and A50 III?

Apart from the power output being very similar,has anyone had or tried these two amplifiers.Are there differences in sound or anything else?Tanks

I'm currently using the stock cable. I hope the connection isn't wrong!!

Hi, is it worth changing the standard cable to the HIFIMAN 400se headphones?

Good evening. I wanted some advice. I have been using Jriver as an audio player for years. My version is 22, but I saw that they have reached 32. Is it worth updating, or has nothing changed on the audio level? somewhere a guide for the best setting of it on windows 10? Thanks

L30 works in tandem with E30 dac