Search results

Thanks again. I have 2x D50 III 1st will work with USB only - (but this settings don't apply to USB) 2nd will work most of the time with USB but sometimes with Coaxial and Optical inputs. BT will never be used for both devices.

One more question... 7. Bandwidth setting Default is 4 What this setting change? How can I know which setting is best for me?

Thanks...

Until today I used Topping D10s plus Intel NUC 8I5BEH with JRiver Audio software. My D50 III and P50 arrived today... WOW !!! This is huge upgrade comparing to D10s... at least in my opinion. Also DAC in my amp Marantz PM6006 UK Edition is no longer competition to my USB DAC. Maybe more...

I decided to open return on ebay for this amplifier. Just discovered another problem. Analogue inputs, tested on CD input. When listening classic music over headphones at lower levels (when volume is set below 9 hour position) delicate sounds are played with distortion and I can hear some...

Hi and thank you for the answer. Yes, I know how to solder and have good soldering station (Weller). I have some basic electronic knowledge. The amp that arrived from ebay yesterday arrived with dent on the right side. It happened during delivery. I'm still not 100% sure that I will keep it...

Did anyone here investigated the problem? Marantz PM6006 UK (and other models) buzzing noise digital inputs. This is also happening with PM6006 and PM6007. Some amplifiers are more affected and some less. My PM6006 UK Edition have the problem but... I can hear this buzzing noise on any...

Thank you for the answer. What is the source of this information? I tried on Topping official website, ShenzenAudio and user manual. I couldn't find this info.

I ordered two... the price was great. One for work and second for home.

What USB speed is required for this DAC? I will have separate power supply. So I'm asking for data transfer speed only.

I'm using Marantz PM6006 UK Edition for a few years now. This amp is working in my office/workshop space and sometimes is turned on for many hours. The volume know is usually set at hour 9... sometimes 9:30. I noticed since the beginning that after playing music for a few hours the top cover...

Hello! Toku-san. Thank you very much. Since the stand is ready I can focus at media player. For now I'm using Kodi with WASAPI driver to play music from my flac files. I will try other player soon. I must admit that I'm more than happy with this cheap Topping DAC. Much better sound comparing to...

Today I created final version of my stand for micro audio setup. Brass plates 150x150mm 2.5mm thick. No more interference between devices. It is my work/office sound system and space is very limited for it. In the future I should have more space to separate them in "normal" way. But I must say...

One more time... thank you for answer and help.

Thank you for the answer. Is 3mm brass plate which I used good enough? What about stainless steel? I saw on internet that some people are covering inside side of this DAC with self adhesive copper film. Dose it make sense? From my point of view the problem is solved... but I'm happy to learn...

Thank you for the answer. I have 2 identical sets D10s and Intel NUC. In both situations I have had this same problems when stacked one on another. In first set I separated them far enough to solve this problem. Second set (on pictures) the stand solved the problem. In the future I will have...

Since we are talking about sound noise or other sound distortions. Could someone please explain me this situation? I have had a small problem with my configuration D10s and Intel NUC NUC8I5BEH. When NUC was sitting on the top of D10s like on the picture I was hearing randomly crack/sizzle in...

Thank you. I just finished reading. Reached to this same conclusion.

You are welcome. So 5V 0.5A - 1.0 A linear power supply should be OK ? I'm just reading this: https://www.audiosciencereview.com/forum/index.php?threads/do-you-need-linear-power-supply-for-dacs.7021/

There is a solution how to easily separate USB signal from USB power. https://www.audiophonics.fr/en/dc-power-cables/usb-b-adapter-cable-for-external-usb-a-power-supply-p-8389.html Now external linear power supply can be used. Could someone tell what power should have this external power...