Search results

Thank you very much for your reply, I don't have this amplifier yet but I'm going to buy it soon and I wanted to know what this filter was for before buying it, thanks again.

Ok , thank you very much !!!

Hi guys , I have a question about the SMSL RAW-HA1 amplifier, what is the filter section for in the amplifier settings and what does it change in terms of sound ? And if I don't want to use these filters, what option should I set this filter to ? Thanks guys .

Thank you, but in any case since we can not have a symmetrical sound at the output jack 3.5 mm 3 pins, this has no interest for me, as I said above, before I connect directly to the jack 3.5mm DAC if the result is the same!!!!

Thank you to everyone for responding, you're always on top !!! :):)

Yes, that's what I thought, it's all the same as if I used the 3.5 output directly on the DAC, except that with the adapter there could be a risk for the DAC! Thank you very much for being so clear

I've just looked at the link, but it doesn't do me any good, as they say in their description, the sound output on the 3.5mm side will be unbalanced and not balanced, so I might as well use the dac's 3.5mm output directly !

So is there a risk for DAC or not at all ? And the sound at the 3.5 output will not be balanced , can you confirm that?

In fact I think they've connected the two ground pins on the 3.5mm side together, isn't that right? So it's as if I were using the 3.5mm output directly on the DAC, so as you say it's useless !!!

I've given you the assignment of the 4 pins on the 4.4mm side, but on the 3.5mm side it says it's a 3-pin, and I don't understand the assignment on the 3.5mm side.

Here's the converter pins assignment !!! Technical specifications Connectors: 1 x 4.4mm 5-pin stereo male jack plug 1 x 3.5mm 3 pin female stereo Pin assignment: G+ 1 - 3 G-2-4 D+ 3 - 2 D-4-1

Hi , If I connect this kind of converter jack 4.4mm balanced to jack 3.5mm ( 3 pins ) on my DAC AKLIAM PD4 Plus, will the sound at the output 3.5mm ( 3 pins ) of the converter be balanced or pseudo balanced and is there a risk of damage for the DAC please? thank you.

Ok, thank you for answering me simply !!! :)

And in the first case the sound will be balanced or not at all ?

I didn’t understand , I don’t ask for so many details , I just want to know if I plug adaptator on a 3.5 simple stereo jack , is what I would have a balanced stereo signal to the 2.5 balanced jack output, and if it involves risks for the device or connector is connected, simply!!

Hi , I have a question , with the adapter jack 3.5 to 2.5 balanced , if I plug it into a simple stereo jack 3.5 , as will be my stereo signal to the output of the female jack 2.5 of the adapter, it will simply be stereo or stereo balanced ? And does it involve risks for the device where the...

I didn’t even know he had released the DAC SMSL DL200, I just saw it :D:D:D!!! Thanks guy

oupppssss , I made the mistake , I didn’t pay attention , excuse me , I delete!!!

SMSL AL200 Integrated Amplifier Review

And I'm pretty sure you'll be happy with it !!