Search results

I have this sorted and am successfully using IR to control the DAC. While the LSB codes I generated with the Arduino were correct, I made an error translating to the NEC decimal codes and the non-LSB HEX. The correct IR codes for the BC-15A remote are: User code 0x1234 Power: 0x18 Mute: 0x06 +...

I used an Arduino Uno to capture and identify the IR codes transmitted alongside the BT by the BC-15A remote. I have previously done this successfully to obtain the codes for the RC-16A remote so the method should be fine. For the BC-15A, the device code seems to be 0x482c and by way of example...

Has anybody updated to the new v1.23 firmware and confirmed it is ok? I’m intrigued by the note “Adjustment: When powered on, if the Bluetooth remote control is not connected, the infrared remote control is enabled for control”. If this works then I might finally be able to control it from my IR...