Search results

So I'm guessing a Denon X1700H would be underpowered right?

What speaker would you choose with a weaker amplifier: Q Concerto Meta: 1.200€ R3 used: 1.000€ R3 Meta used: 1.280€

Thank you very much

So I'm currently running this cable for my smaller sub https://www.hifiklubben.de/essentials-basic-sub-subwoofer-kabel/essba1sub1000/ And an Inakustik RCA cable for my big sub (XTZ 12.17 Edge) I've read somewhere that coaxial cables (digital cables) would be better for subwoofers. Is this...

KEF Q350s for 164€ a piece. https://hidden-audio.de/product/kef-q350-stueckpreis-regallautsprecher-1012222/?varid=1008891

So if I can only use the EQ on the back what should I set my settings to? (Monitor/Music mode and other settings on the back?)

My 8010s also have hiss. It's not really audible but it's there.

So not really an upgrade compared to the Q350s right?

Hey I know this post old but have you found another sub? My ESI Aktiv 10S also adds noise to my system and I was looking at KRK subs. But seems like it's the same with the KRK ones.

I was really hoping for a "smaller" center channel in terms of height :/

Also another question, since the speakers are placed on a cabinet would I benefit of getting bigger feets/pads for the speakers? I currently have the small standard KEF feets on them. (Except for the center, that's angled slightly upwards with some anti slip feets for furniture)

This is what the FR looks like with ERB smoothing. I'm not exactly sure if this is acceptable or not

Thank you both. I may have to try other mlps. I found some older measurements with the speakers in the same positions without the huge dips. But I used all 8 measurement points back then with more spacing between them. Sadly I can't really move the speakers nor the mlp elsewhere :/

So I moved the speakers and tried the port plugs, but I sadly still get these huge dips with my FL speakers. Could this be something wrong with the cables or is that unlikely?

I won't use standard Audyssey anyway. I'm using A1 Evo by OCA so it won't matter. Thanks I'll definitely try both things

I've just setup my new 5.2 setup and ran a quick 3 point Audyssey measurement (all at MLP). However the results were a bit surprising. My fronts and center (Q350) are on an IKEA besta TV board and are as far away from the wall as possible (roughly 12cm) without port plugs. Placement of these...

I currently have a 5.1 setup. FR/FL: KEF Q350 C: KEF Q350 SR/SL: KEF E301s SUB: MIVOC Hype 10 G2 ( Would maybe want to keep this on in the system and add a second ported sub, if that's possible to integrate well) AVR: Denon X1700H I have the feeling that my subwoofer is the weakest part of the...

Is there any consensus on which of these wireless subwoofer kits is the best (KEF, SVS, Klipsch etc.)

Ok so if I understand correctly 10 degs off axis means imagining a straight line from the speakers to the mlp and then toeing them out by 10 degrees?

However these measurements here https://audiore.kr/kef-q350-%EB%A6%AC%EB%B7%B0/ Show quite a bit of difference with the port plugs in