Search results

Do any available receivers or pre pros even have HDMI 2.1a? HDMI 2.1b is actually the latest now.

I was just about to buy the A1H but seeing this announcement I might just wait a bit. They do mention a few upgrades that "improve distortion and noise", whatever that means. The question is it an upgrade over the A1H announced over 1.5 years ago?

We still don't have the A1H review, so I think chances are slim someone sends in the A10H. I'd love to see either.

The reviews are good, no doubt, however after hearing BE tweeters and ribbons I could never go back to aluminum dome tweeters (even if they have fairy dust sprinkled on them :cool: ).

Where does the "tonality" score come from and what does it mean? What tonality score did the Revel F228be get? Thanks!

I always thought this was a little tacky, no?

Does anyone know the difference between the SX-1115-RT and the SA-1810 other than the form factor? Thanks!

What an odd coincidence. Tekton is disagreeing with or threatening legal action against the only two companies that have provided a technical review based on measurements. Seems to be a pattern.

Any hints at this thing getting Dirac ART when available?

Thank you. I found Glen's response. He's basically saying, yes, all Amir's measurements are spot on, however, we don't have the tests to properly measure the differences. Which then made me wonder......... if we can't measure the differences, how did he test and design for the same? Glen...

Can you provide a link to his comments? I don't know what PS A is. Thanks.

What is the consensus on Furman products? https://furmanpower.com/product/discrete-symmetrical-power-filter-20-amp/

We are lost without our leader Napilopez, stumbling in the dark. :D

Correct, 4". Measured from the 1/2 the peak of the surround to 1/2 the peak of the opposite surround.

Yes, I am all set as far as the measurements and equipment go. I just need help in blending the measurements into a 20 to 20K range. Thanks!

Hi Guys, I am in the process of learning how to use REW to make indoor speaker measurements using the method found here: https://www.audiosciencereview.com/forum/index.php?threads/how-to-make-quasi-anechoic-speaker-measurements-spinoramas-with-rew-and-vituixcad.21860/page-9 The thread has...

Thank you! The raised part is considered the "surround" putting this driver with a piston area of 4".

Sorry, I should have been clearer. I'm asking where to start the measurement for the piston area... half-way into the blue line or half-way into the yellow line? If we measure from the blue line the piston area is 4.5 inches. If we measure from the yellow line the piston area is 4.0 inches.

I think I'm still confused by how to measure the "speaker piston diameter" for the baffle compensation spreadsheet. In the pic below do I measure halfway from the blue line or the yellow line? Thanks!

<< Based on your outdoor photo, it looks like the speaker is far forward on the turntable. The baffle should be directly above the axis of rotation.>> I haven't posted my off axis response yet, however, I think I did my off-axis measurements wrong. I had the baffle of the tower speaker aligned...