Search results

  1. H

    Any experience or reviews for "Tivoli Audio Cube"?

    @JeffS7444, you bring a very valid argument to the table! I'll check out recent bluetooth speakers as an alternative. I do have a Sony SRS XB 20, but it is "uncomfortable" to listen to, this is why I did not think about this direction. But there should be other speakers with a more pleasing...
  2. H

    Any experience or reviews for "Tivoli Audio Cube"?

    I came here for facts and experiences from other user and not for psychological interpretations. I got it, you don't like Tivoli. Thanks for your "constructive" replies to this thread.
  3. H

    Any experience or reviews for "Tivoli Audio Cube"?

    The unit @recycle links seems to be the same as the Cube, just with an added charger and lamp. The reviews talk bad about the bluetooth implementation and the charger, but the sound is mentioned as "pretty good", whatever that means. I don't need wifi or bluetooth, I would connect the Cube...
  4. H

    Any experience or reviews for "Tivoli Audio Cube"?

    Hi, I am interested in the Tivoli Audio "cube" loudspeakers. See for example https://tivoliaudio.eu/pages/experience-cube-wireless-speaker I know these are quite small lifestyle speakers, but I would be interested to use these in a similar fashion to the auratones/avantone cubes, i.e. as a...
  5. H

    RME Babyface Pro FS Portable Interface Review

    There a really many standards with USB. A USB 3 (type A) is required to support 900mA but most modern ports supply BC whch gives 1.5A. A USB C will give 3A at least (when using a C to C connection), but most ports supply 60W, which is obtained by negotiating higher voltages. It gets trickier...
  6. H

    RME Babyface Pro FS Portable Interface Review

    I know the babyface has a DC input jack, but it is a device that is designed to work with a USB-2 connection only. This limits the total available power, and this is why they can't include a powerful headphone amp. With USB-3 they could include a more powerful amp. I think the Audient id24...
  7. H

    RME Babyface Pro FS Portable Interface Review

    I was not very precise about using "USB-C" in my post, I didn't want to sound too technical. USB-C is the conector type and what counts for power is the USB standard. Power limitations exist for the different standards of USB i.e. USB-1, USB-2 and USB-3. As far as I know, the babyface uses the...
  8. H

    RTL (Round Trip Latency) measurements for Rode AI-1

    Wanted to share my RTL measurements for the Rode AI-1 audio interface, both with the Rode ASIO driver and ASIO4ALL. Measured with loopback using RTL Utility ver. 1.0.8 This is a good example against the advice "always use the ASIO driver supplied by the manufacturer", in this case ASIO4ALL...
  9. H

    RME Babyface Pro FS Portable Interface Review

    Great that RME is answering questions directly here! As they seem to be following this thread I dare to post my wish list for this almost perfect device: i) USB-C in combination with a beefier headphone amp when USB-C is connected on the host. As stated by RME earlier in this thread, amp power...
  10. H

    RME ADI-2 DAC FS vs Fiio K9 Pro ESS vs SPL Phonitor One d vs SMSL M400+SMSL SP400

    I would like to ask, why is the "RME Fireface UCX II" not in the equation? I ask this because I am currently going through the same decision process. DACs not good enough? It comes with 9 PEQ now and you also get Crossfeed for the headphones. Sounds quite interesting to me.
  11. H

    Improve current system with Kef Q1

    Thank you very much RickyC34! The sources are: Main source is a Wiim Pro Plus (as far as I could find out only graphic EQ for given bands) CD Player Laptop (using Equalizer APO) Ideally I would find a common EQ solution for all three. I have been reading into the MA1 software and it looks like...
  12. H

    Improve current system with Kef Q1

    Hi all, I am thinking about an upgrade for my current system (Kef Q1 speakers on a NAD352). Ideally it should serve for Hifi listening and Music production and the budget should not exceed 2000€. I have these speakers in a L shaped room (37m^2) with no treatment (and no treatment possible for...
  13. H

    Definition of PEQ parameters

    Hi all, thanx for providing these interesting measurements, I just discovered this page! I have a Sennheiser HD598SE and tried to use the EQ settings provided here I don't quite understand the PEQ settings when comparing with the provided graph and the data provided in the second post of that...
Back
Top Bottom