Search results

  1. robertospeed

    JBL L52 Classic review by Erin's Audio Corner

    I'm Italian, sorry for my English, I use the translator. I also have the JBL L52 Classic black edition and I play them with a Yamaha A-S701, I like the tone, but I don't know if the amplifier can drive them well because I'm not an expert, but I noticed that the JBL woofer it moves too much, but...
  2. robertospeed

    Topping D50 III Balanced DAC with EQ Review

    But does this Topping D50 III turn on even if I don't plug the cable into the POWER input ? because I see that it turns on even if I only plug the cable into USB-C input only , how come ?
  3. robertospeed

    (Unofficial) Topping D50 III DAC review and measurements

    But does this Topping D50 III turn on even if I don't plug the cable into the POWER input ? because I see that it turns on even if I only plug the cable into USB-C input only , how come ?
  4. robertospeed

    Topping D50 III Balanced DAC with EQ Review

    Topping D50 III must get to me today, so I don't know what firmware I get to, you have already tried this new firmware V1.37 ?
  5. robertospeed

    (Unofficial) Topping D50 III DAC review and measurements

    You find it written when the archive downloads. To me the Topping D50 III should get to me today, then I will see that version of firmware has, in this case I update the firmware that should solve some bugs Sorry, but I use the translator, I am Italian and I don't know if the translator has...
  6. robertospeed

    Topping D50 III Balanced DAC with EQ Review

    Topping D50 III version V1.37 firmware update September 5, 2024 Link: https://www.toppingaudio.com/download/d50-iii-v1-37gu-jian-sheng-ji-2
  7. robertospeed

    (Unofficial) Topping D50 III DAC review and measurements

    Topping D50 III version V1.37 firmware update September 5, 2024 Link: https://www.toppingaudio.com/download/d50-iii-v1-37gu-jian-sheng-ji-2
  8. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    I had an E30 II Lite, and I compared it with the E70 Velvet, but I didn't notice any difference in sound, I also have a D10s, and I can hear the difference, less refined on the highs, they are small nuances anyway, I also had a PA5 II Plus , for me in terms of volume it sounds really pianissimo...
  9. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    Thanks, I updated, and everything was fine
  10. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    You can share the firmware here, I would like to update the firmware
  11. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    Yes exactly , in fact afterwards I wrote this: Wait , I did the procedure , I turned off from behind and turned on again with the volume monopole always pressed , and so if you manage the filters from volume knob F-7 it appears to me also , instead from remote control F-7 it does not appear
  12. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    I bought the Topping E70 Velvet on January 15, 2023 and never updated the firmware , but I have firmware v1.04 . From remote control I press FIR button , but the filters come from 1 up to 6 in PCM , instead in DSD there is no filter . I have always connected the DAC in USB to the PC . Wait ...
  13. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    In my E70 V. the Filter 7 does not appear, but only appears from 1 to 6
  14. robertospeed

    Topping E70 Velvet (AKM 4499EX)

    I have the Topping E70 Velvet and also E30 II Lite , for me as sound they sound the same and I don't hear any difference and they both work very well , I don't use the optical and coaxial inputs , but only USB PC
  15. robertospeed

    Definitive Demand D11 Speaker Review

    Hi everyone , unfortunately with a change with my shopkeeper I only have these 2 choices: DEFINITIVE TECHNOLOGY DEMAND 11 or JBL L52 CLASSIC. Unfortunately I can't go and listen to them , because the store is too far , and I don't have any store nearby , and I have no chance to go and listen to...
  16. robertospeed

    Aiyima A07 Max - Aiyima's new TPA3255 amplifier with mono/stereo output

    So , Aiyima told me to make the connection like this , from the toggle below of A07 MAX set it to mono , then you need a preamplifier , or a DAC that acts as a preamplifier , and then control the volume only from the preamplifier , look at the picture:
Back
Top Bottom