Search results

Hello All, I'm looking to add room correction/equalization to my 2.1 separates system (currently implemented with budget friendly hardware). I'm using RCA interconnection today but would like to have the option for XLR for future use but not mandatory. I have been looking at the MiniDSP...

Hello @Fosi Audio. Can you please comment on the not so flat frequency response curve for the BT20A Pro Bluetooth input?

I was able to verify the bluetooth on my unit has basically same frequency response into an 8 ohm load as @Jimi Floyd reported, the RCA input is flat as @amirm's tested. I used an inexpensive bluetooth device like this one into the RCA input and the response was flat. This devalues the...

I just received my BT20A Pro with the 48V supply. After playing for 2 hours at full volume on the BT20 at about 83 dBc with B&W 602s, the power supply was at 63 degrees F and the amp case was at 81 degrees F. The room temperature was 61 degrees F (my cellar). Hope this helps.

I'm getting BT20A Pro buyer's remorse.... Maybe you'll give a coupon code to the BT20A Pro supporters :)

I just purchased the 48 volt version of the BT20A Pro, any chance it will come with the new vented case?

Thank you for all the input! After some listening tests I settled on the F206s. I have had them for about 2 weeks and they sound superb in my setup without any EQ. I haven't had the chance to run through Arc Genesis.

Has anyone received the 48 volt PS version? I was wondering about any safety rating on the PS. Is it something we could trust to be plugged in 24/7?

Just received the Modi+, works great! Thanks again AdamG!

Thanks again AdamG.

The Anthem AVM 70 8K is priced at $3,399.00, down from $3,999.00 and it's on the recommend list ("Grading on a curve"). I purchased it about a month ago and I love it so far.

I'll take it. Thanks AdamG!!

I have the Anthem AVM 70 so I can EQ with Arc Genesis. EQ-Ability was one of things I was wondering about. Thanks Steve. As for my room, I'm one of the unfortunate ones with a "cornerish" setup :confused:.

Does anyone know of a review of the F206 like @amirm's M106 and F208? I was looking for a bit more measurements than what Harman has published and listening tests.

Thanks for the advice. My local Revel dealer (50 miles away) has the M105 and F206 in their listening room, no M106, hoping to get over there and give them a listen. I found on ASR there was a 30% discount on Revel last September, does that happen yearly?

Hello All, I'm looking to replace my old B&W 602 S3 with the Revel M106. I'm also considering the Revel F206 if I can justify the extra cost with better sound. Another thing I'm considered about is the age of the Performa3 lineup since it was released in 2013. I have been draw to the Revel...