Search results

I get that but I'm using 3.1 with a stereo amp for L/R and the fosi mono for the center, with room correction that matches everything. But I tested the fosi and it does have the reversed phase. Do I just reverse one of the ends of the speaker cable going to the center speaker from the fosi...

So what would be a solution in that situation? 2 different amps volume matched but one is out of phase?

This is not a fan - it doesn't actually cool anything down. Put your hand to it - it doesn't blow. It's an exhaust. This one does https://acinfinity.com/component-cooling/cabinet-fan-systems/airplate-s1-home-theater-and-av-quiet-cabinet-cooling-fan-system-4-inch

About a week from receiving the tracking - very close to you geographically

The gain switch only affects unbalanced connection is that correct? I saw someone say that XLR is set to 20db gain and that's that.

So is it worth swapping Muses02?

So is it worth swapping Muses02?

Is there a guide for changing op amps?

Did everyone who received their amps also received the the email notifying them that it was shipped first?

That's about average

But is it getting hot when you use it?

You'll be lucky if you'll get it in August/Sept.

Weird. That makes me think something is wrong with the calibration equipment because audyssey is listening to itself while calibrating and would adjust the volume to whatever it needs it to be. I think. That's why it disables the AVR volume.

Why are you controlling the volume with the external amp? You need to set it to max volume, and control the volume with the AVR. This is why the Fosi not having volume control is more of a feature than a bug.

Those are minimum requirements, I'm asking about the maximum limit.

chart was published by the HDMI foundation https://www.hdmi.org/blog/detail/142

Thanks. But is that bottlenecked by your TV or is that the format limit? If both of my devices can supply --> accept 192/24 - I'm curious what I'm actually being limited to by the ARC protocol.

Hi, I found a comparison table that states that eARC allows for 192khz/24bit audio. But does anyone know what the regular ARC bottleneck is for frequency/resolution? Can't find the info. Thanks

Is there a way to tell when my unit would be shipped