Search results

XMC-2 offers different setup slots for the inputs and for the speakers as well. I will run the 7.2.4 HC correction with Dirac Live. It does a good enough job for me for this tasks. As mentioned I may run the Dirac Live correction for the 2.2 setup as well, but this time I want to try to deal...

If my goal was to get a proper stereo only setup, my approach would be close to your suggestion indeed. However the purpose of my setup is to be flexible for both the HC and stereo with the best representation I can possibly achieve. So back to the topic, what are my current best effort options...

Good THD+N/good timing comparing to what ? Yes I am trying to do my best. ATM my question is what is the best effort practice considering the described path to get the SUBs aligned to the mains.

I may try 80 as well. Yet 40-60 deep is too big with the front location of 2 subwoofers. As for the review, it is still controversial topic. It would be nice if Amir could test another unit, but it is what it is. The XMC-1 was a great piece of hardware. XMC-2 is pretty good in many aspects...

Maybe I am missing something. Here are the screenshots of the integrated Front+Back subs with the Mains vs the Front only with the mains in frequency domain - 1/12 smoothing. Not the proper way, since the speakers ports are open and it the the only single sub in the front, but as I have...

There is a doorway in the right and with the wall nearby it influences the response of the right speaker. However, the near 30Hz peak is a front-back wall room mod doubling later on - mid room and so on. Thanks ! Those ( vicoustic wavewood ) traps are weak for the low bass. As you mentioned...

@ZolaIII , I have edited the post with the screenshots. Current state room picture is attached taken from near the back sub placement. There is not much freedom in the room as regarding the speakers placement. I tried of course to place the second sub MLP equidistant - near the left speaker, but...

Zolalll, thank for the good pointers. The speakers placement is done a while ago. R3 are on the good old filled Atacama stands with spikes with the silicone pads under the speakers. I am planning to plug the ports and to try the 90/100/110 XO once I progress with the alignment issue. ATM the...

Yeah. miniDSP 2x4 is quite limited in this area. Might be enough though. I have not tried. 2048 per output for 2 channels...

Hi Everyone ! I need an advice for the my stereo setup. I am using a 7.2.4 system that is used for HC and music in a dedicated room. Rough dimentions : 520 cm x 320 cm. Ceiling 260 cm. The stereo path of my system : DAC: Denafrips ARES 12TH Pre/Pro: Emotiva XMC-2 Power: Emotiva XPA-2 Speakers...