Search results

We also did a quick measurement of a sample from the 1st batch and found the correct power output.

Hi, We must admit to have never tried IRL but on paper it should work without trouble. We remain at your disposal. B.R

Hi, Yes you can totally use it without the special edition with reversed GPIO connector. We remain at your disposal for any needs or questions. B.R

Yes we selected a versatile and common model that offer good performances and availability in DIP8 format. What models would have been more relevants ? Any suggestion welcome for future updates.

This is of course a small error. This is now fixed. Thank you!

There is no relation with amplifier signal, it's external mechanical noise, emitted by the OLED display module itself. Due to PWM current spikes into the coil.

Hello, we just found a way to fix noisy OLEDs. This is a hardware fix. For customers affected by noisy OLEDs, please contact our technical support (Open a ticket in your account), we will tell you how to proceed.

Hi, You can add an external 5V one if needed : https://www.audiophonics.fr/fr/kits-et-modules-diy/audiophonics-trigger-5v-230v-sur-prise-iec-declencheur-d-alimentation-p-18135.html

The trigger board was originally designed with an attachment point on the IEC screw, but the assembly was not convenient and we found that it was already securely attached with jack sockets. We have no cases of a broken socket or an issue with attaching this board, but we will think how to...

Our S/PDIF reclock has no delay. Delay will be only applied to FIFO reclockers.

This SPDIF Reclocker was designed and developed as a solution to issues many customers have faced: SPDIF with interruptions, discrepancies, no sound at all… Until recently, the error margin to receive SPDIF signals was wide enough to accept any kind of signal, whether it was clean or not. DACs...

It seems to be a DAC with a ROHM BD34301EKV chip.

Here are 2 photos taken from a paper catalogue (hence the average quality).

Here is the official image received from EVERSOLO:

Thanks for the review. The DAC level was intentionally limited because as a digital amplifier, we felt it was comfortable knowing that with maximum signal (0dB), and maximum volume, you reach the max power (or almost), without distortion .

The MATRIX ELEMENT P2 uses the ICEpower 250ASX2 module (information collected from Matrix).

Yes, you can connect an active subwoofer to this pre-out RCA output.

Linkplay module accept Airplay, so : Roon -> Airplay -> Wifi Input

We updated the manual. It's the Wifi Reset button. Blinking mean that the Wifi module is not connected.