Search results

This thread should be retitled ‘please tolerate our obsession with minutiae’.

It would be hard for a measurement-centric community such as this to recommend a device that doesn’t have published measurements yet.

Maybe people didn't catch that there are measurements in the link...

wouldn't you be unable to use sub(s) if you use an external amp with theTDAI 1120? That may not be an issue for you, but may be for others...

Most likely you are not level-matched between the two conditions...

What drew you to those particular three options?

Three years seems like a long time to wait before complaining...

Are you really willing to spend tens of thousands of dollars based on opinion(s) of complete strangers on the internet?

The reason it would make 'sense' to digitize all the inputs is so that the Dirac room correction on the M33 can be used to help manage some of the negative acoustical effects induced by your room...

All I can imagine at this moment is the Homer Simpson car...

This is what I love about ASR. A dude that sells equipment for a living trying to convince someone to NOT buy a piece of equipment. In any case, in my way of thinking, given the A8 is audibly transparent, adding something else to the chain just represents an opportunity to make things worse...

Philharmonic Audio BMR Monitor. Measurements, lots of discussion in ASR, designer is well-respected, punches above weight class, etc. BTW, this post would probably get better traction in the Speakers section of ASR...

The answer to the 'does it have to be connected to an analog preamp?' is no, it doesn't have to. The answer to the question as to whether it is 'safe' from a glitch causing it to go to full output is there isn't enough data to predict the potential occurrence rate of such an event. There are a...

Are you asking what EQ settings should be used for those speakers? if so, I don't see any data of their frequency response on ASR. I suppose you could troll the internet looking for some data, then try to correlate that with what you are hearing and design an EQ 'fix'...

does Lyngdorf have anything new in the works at the show, or is it still the current TDAI1140 etc.?

I was happy when this thread died a natural death the first time, but alas, here we are...

If you could sell the Naim and your other player (what is is BTW?) and replace with the Wiim pro plus and an audiophonics amp and come out ahead, that may make sense, oddly. Any sonic improvement that may occur from that scenario would much more likely come from the Naim to Audiophonics class D...

Have you measured with REW and a UMIK yet to see if, and at which frequency, any room modes are occurring? I suspect the general consensus here will be to 'measure first' then decide on a strategy...

i saw what you did there

I think what was being asked was more along the lines of what specifically do you wish to improve about the sound? Without understanding that, the community can't really give you any good advice...