Search results

Very interesting question. I assume the Kali internal dsp, simply isn’t powerful enough to achieve this. Which is IMO totally fine considering their cost and the availability of affordable 3rd party correction (DIRAC). I’d rather take better dispersion/distortion performance with a less linear...

I am not just a hobbyist who is experimenting. Professionally, I am actually a systems engineer & designer (live sound). Objectivity is practically my middle name at this point, and is something I have built my career around. That being said, I bought the 7506s for a cheap, beater pair of...

What? I didn’t write the post I linked. I never threatened anything nor posted a before photo. I’m not even sure where you are getting this from? I never once claimed a hard and fast “rule” to the modifications. These modifications are subjective and infinitely variable. If one bass port being...

7506s are a decent value for the price, however invest $20 and a half and hour into modifications and they really come into their own. Opening up a bass port, dampening the driver shield with dynamat, and swapping to deeper and better sealing pads genuinely transforms the headphone. I love my...

Truly an amazing swan-song for the high value/budget passive speaker era, as the industry trends towards DSP/Active to force budget designs into submission. Huge kudos to the designer for pulling this off at this price point. Round the edges of the baffle and implement a proper xover to a sub...

Well this is just further proof that the DAC problem is solved. Every few weeks we get a cheaper and cheaper product, which manages essentially state-of-the-art performance Still waiting for the day that topping/smsl/fosi/etc release a MiniDSP Flex competitor. Would love to see this level of...

Hi, pro live sound guy here. The PK stuff is a "solution" to a problem which doesn't really exist in the real world. Array splay angles are calculated with prediction models. If you need to adjust array splay angles after they are hung, you probably should pursue a different career. Adjustable...

Essentially the same gain (0.64db more on the Fosi). Must be something else. 3E has much better load dependency, multitone, two tone multi, significantly better power:THD-N behavior, much better freq:power plot, and better reactive load performance. If only they offered them in a pre-built...

I use generic XLR to Ethernet boxes to send 2in 2out AES3 (pro version of spdif coax, like rca vs XLR) streams over 100ft cat5 passively without a hiccup. Digital audio is much more resilient than most people realize.

Amazing, however still handily beat by the 3E audio boards as measured. Wonder what the 3E guys know that fosi does not yet.

If it doesn’t obscure sight lines (I.e if the “stage” is elevated, so the stacked subs wouldn't block the view of the DJ/Performer/etc...) directly in the center between the mains (on stands). If for this particular event your system is set in stone, and will consist of 2x pole mount speakers...

You shouldn’t do cardioid with only two subwoofers. You want a 2:1 (3 boxes) or 3:1 (4 boxes) ratio of forward:cardioid. Any less and you are sacrificing efficiency. You could do an endfire with only two boxes, to achieve a similar effect but without the efficiency drawback, but unless the...

Sorry, I should have been more clear, I consider the subs and the mains to be the "basic LR pair” since the QSCs include hi-pass/low-pass true 2 way crossover. Even if they didn’t, it may be a bit inconvenient, but you can achieve a basic 2 way crossover in the mixer. I wouldn’t go further...

Hi, Live Systems Engineer here, If you are only deploying a basic full-range LR pair, the mixer will be fine, as all you need is a a basic compressor/limiter and EQ. The second you add subwoofers, fill speakers, etc.., you will want outboard DSP for routing and control, to handle crossover...

Example: if you are 90deg out of phase at the acoustic crossover point, inverting phase will make no difference (now you are -90). Delay and phase are both crucial to proper sub integration. I use both often. SMAART doesn’t lie.

I know nothing about products like these, but I have to assume that any filler/paint over the front surface will seriously affect the performance. Is the front baffle/mesh/cover a hydrophobic weave or something to allow small holes for sound to pass thru or is it truly intended to be...

Low passed subwoofer outputs are completely pointless considering every powered subwoofer already includes a low-pass. I wish these manufacturers would instead implement an accurate high-pass filter to the amplifier outputs and a full range “preamp” output to drive a powered sub, which allows...

Would appreciate a photo input and analog line input measurements performed in the future on products like these. Obviously this one is a lost cause and I don’t think anyone will be purchasing it that reads this review, but it would be nice to consistently have that data for other products in...

In live sound, which is their main scope, and also in high output pro studio use (as mid/far-field monitors), yes absolutely. In my circles (live audio engineers), it is common knowledge that the limiting factor in usable clean output is generally set by the compression drivers distortion wall...

Damn this is really embarrassing for me. :facepalm: When I was a little kid my parents stopped doing Easter with me because I would stare directly at a bright pink egg surrounded by green grass and not be able to see it. Apparently I haven’t changed much since then since I completely missed...