Search results

  1. Lednek

    JBL Stage A130 Review (speaker)

    I took mine apart and had a look. Everything seemed to be wired correctly. Is this an issue where the tweeter is out of phase with the woofer? If so, how would switching the wires at the terminal fix this? I'm always looking to improve my system. Especially when it's this easy.... and at...
  2. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I had the same question. For me, the survey was unavailable on thr kickstarter app. Once I logged in from a web browser, I could view and complete it.
  3. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I have asimilar setup and plan. Using a Dennon 3400. I'll be using the LCR single ended preout to drive 3 V3 mono for the front stage. Additionally the balanced output from the DAC can be used for a pure 2 channel experience. I Imagine I'll use the RCA pre-outs more often than not, as I...
  4. Lednek

    Fosi Audio V3 Mono Amplifier Review

    They collect info at fulfillment.
  5. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Because the Hyoex Nc252 modules would be the closest in price point. They are stereo modules. It would be a pretty good step up in price to go with three single channel modules.
  6. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Thank you. I was looking at it completely backwards. Like what could it possibly do to the subwoofer. Thanks for expanding my understanding and saving someone from my hasty response.
  7. Lednek

    Fosi Audio V3 Mono Amplifier Review

    This would explain the problem with simultaneous low and high level hookups. But when running only speaker level connections to a subwoofer, how can the subwoofer or speaker for that matter differentiate a bridged amplifier from a non bridged?
  8. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I guess you could adjust the sub output to match your 2 channel, and let the avr processor do the equalization for the multichannel. Just a flip of the switch between sub inputs.
  9. Lednek

    Fosi Audio V3 Mono Amplifier Review

    In my theater setup(Denon x3400) I crossover everything at 80hz as I have some decent subs(Monolith 12's) and want to take as much load off the amplifier. I will be using three v3 monos for the front stage. My plan is to continue to use the crossed over sub outs for everything. I will also...
  10. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Is this not specifically for connecting LFE(line level sub out) and speaker connections simultaneously? Do you even have a line level sub output? Under what circumstance would someone want both LFE and speaker level inputs hooked up simuopiniously. Obviously the manufacture saw a case, but I...
  11. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Edit! I was wrong. I was thinking about the subwoofer, not the amplifier. This could possibly damage the amplifier.
  12. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I think so! I am currently using a $200 SMSL AO200 for my 2 channel setup. If I remember correctly it rated at an honest 7owpc into 8 ohms. It sounds significantly better than my $1200 Dennon avr 3400x with a fluffed 100wpc channel rating. That being said, the fosi measures much better...
  13. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I have an unopened tube of TF8 I was planning on using. Is thr mx-6 much better. I mean it's only $10 for a 4g tube, but if the TF8 fits the bill I'll use it . Also it's probably going 2 years old, but unopened.
  14. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Thank you! @Fosi Audio. Could you please post the same information for the 5A power supply? I'm interested to see if the ripple spec is equally good. Impressive!
  15. Lednek

    "Music-First Audiophile" Manifesto by John Darko

    Darko is an epic wind bag, some kind of bag anyway. Sorry I couldn't watch through all of this. I however, wanted to leave my two cents. Although it is more than his pomposity deserves. Pretty much everything I dislike about the stigma of "audiophile" is epitomized by John Darko.
  16. Lednek

    Fosi Audio V3 Mono Amplifier Review

    I have seen a video with disassembly (Williston Audio Labs. You can see the thermal compound they used on the heat sink. It looks like there is enough clearance between the heatsink and enclosure. The appropriate contact is created when the two screws on the bottom of the case are tightened...
  17. Lednek

    Fosi Audio V3 Mono Amplifier Review

    My thoughts exactly.I have an unopened tube sitting at home.
  18. Lednek

    Fosi Audio V3 Mono Amplifier Review

    Lol. Fixed, but you have immortalized my comedic genius. Thank you!
Back
Top Bottom