Search results

  1. M

    Buckeye NC252MP Stereo Amplifier Review

    Wanted to add my subjective thoughts to this. I am the very happy new owner of this amp. Real world performance is excellent. It drives my Kef R7 to extraordinarily loud levels with no audible distortion. Buckeye also offers features (auto sense!) that other companies costing quite a bit more...
  2. M

    Pi streamer/camilla DSP/phono integration

    Any idea if I can input TT into M4, then route USB from M4, to LMS USB, through CDSP/LMS, then back to M4? Or would I need an alternate way to send it back? I have no idea if a USB can simultaneously send and receive audio signal from the M4/to the pi
  3. M

    Pi streamer/camilla DSP/phono integration

    Michael, I just want to say thank you for how much I’ve learned from your posts here. I finally figured it out, I believe. I just had to leave the output device as the adc/adc in the PCP interface. Then in camilladsp I left input as “stdin” and the output to the M4. Hopefully my struggles help...
  4. M

    Pi streamer/camilla DSP/phono integration

    Another way that would ideally be more simple: how would I go about plugging TT into M4, routing that to the PCP/LMS/CDSP setup, then back over USB to the M4? I'd also like the ability to stream via LMS ...
  5. M

    Pi streamer/camilla DSP/phono integration

    I've installed CamillaDSP and the waveinput. Works great in LMS. However, I have to change the PCP squeezelite settings from USB to DAC/ADC pro then back again. Then this is listed: It works until I reboot the picoreplayer and then I have to repeat the process in the picoreplayer interface...
  6. M

    RPi + CamillaDSP Tutorial

    Thank you! Do I need to create a different config for each sample rate? Edit: figure it out. Changed the filename to include $samplerate$ in the GUI and it worked! This forum is the best. Thank you for your help.
  7. M

    RPi + CamillaDSP Tutorial

    So I finally have Camilladsp up and running thanks to this thread and this script. Amazing how well it’s working. Seems to be switching sample rates ok, but how would I go about automatically applying a different FIR filter to each sample rate as it switches? I’m new/clueless about anything...
  8. M

    Pi streamer/camilla DSP/phono integration

    Exactly the answer I was looking for. Thank you!
  9. M

    Pi streamer/camilla DSP/phono integration

    I’ll do this hopefully when I get home! Thank you!
  10. M

    Pi streamer/camilla DSP/phono integration

    Thanks! I’d prefer to keep my current tt. Pretty high end, kp-990. I’ve reached the point where I think my vinyl playback is maxed out on cost to benefit. Just wanna get it through the eq like the digital source. The difference is huge with eq!
  11. M

    WiiM Amp discussion

    Update on mine. I’ll be returning it to Amazon. Seems to have connectivity issues that my pi almost never has, buzzing (coil whine?), and radio paradise integration is less than optimal, which is one of our primary sources at home. Still randomly gets warm while sleep mode but that seems to be...
  12. M

    Pi streamer/camilla DSP/phono integration

    Trying to figure out a way to integrate everything nicely. Thinking I will route all of this to a USB DAC and then into a power amp. Here are my thoughts: I would like to stick with LMS on a pi for Qobuz/spotify/radio paradise. I love the integration and interface of everything there; nothing...
  13. M

    WiiM Amp discussion

    Mine is obnoxious and I can hear it from across the room. It is also very warm when it is supposed to be in standby; it’s obviously wasting a lot of power. How is that acceptable?
  14. M

    WiiM Amp discussion

    I would but can’t ruin my warranty. If they send a new one without requesting a return then I’ll open it up.
  15. M

    WiiM Amp discussion

    Heat and buzzing noises in standby is a faulty design. Messing around with power receptacles to try and fix it is missing the point. WiiM replied to me that they agree it sounds faulty.
  16. M

    WiiM Amp discussion

    I did and they said it sounds like my device is faulty. Indicated they would send a replacement.
  17. M

    WiiM Amp discussion

    Update. Amp has a sort of humming noise. Not through the speakers. And it’s always warm even when in standby. Will reach out to WiiM and update here how it progresses.
  18. M

    WiiM Amp discussion

    Max volume nothing playing I don’t hear any hiss from the speakers even closer than one foot.
  19. M

    WiiM Amp discussion

    Hooked up the amp last night. Only briefly used it but it sounded good, peq seemed to work well, and no static or other major problems. Hooked to Kef R7 it drove them pretty loud in a relatively large space with high ceilings.
  20. M

    WiiM Amp discussion

    Just FYI, my wiim amp will apparently arrive tomorrow. I’m in the USA.
Top Bottom