Search results

  1. S

    Fosi v3 Mono | TPA3255 PFFB | Balanced | [First Look from Fosi FB]

    Well the next one will be out by then, it's as fast evolving as the smart phone market with new models every few months it seems
  2. S

    Fosi v3 Mono | TPA3255 PFFB | Balanced | [First Look from Fosi FB]

    We do have a tendency to over analyse here eh? :p let's wait and see what awaits
  3. S

    Two semi-clean monoblocks VS. One super-clean 2-channel amp?

    Undoubtedly they offer better channel separation, but the preamp is likely to still have a shared board / power supply, so unless you're going to dual mono everything, what be the point? Especially as you don't need the power as you've stated "I rarely listen at reference levels"
  4. S

    Two semi-clean monoblocks VS. One super-clean 2-channel amp?

    If I had to choose and my listening levels are similar PA7 would be my choice.
  5. S

    Fosi v3 Mono | TPA3255 PFFB | Balanced | [First Look from Fosi FB]

    Sort of yes, not sure if it's obscured for a reason, looks intentional.
  6. S

    Aiyima’s TPA3255 PFFB based amplifier, coming soon

    Hmm LM4562 wonder if those will go on my TPA3255 260-2-29A board. No sockets though and they're balanced ones, does have a single ended mode though.
  7. S

    Aiyima’s TPA3255 PFFB based amplifier, coming soon

    See conceptually better. Imo..
  8. S

    Aiyima’s TPA3255 PFFB based amplifier, coming soon

    Yes all good things, thanks for keeping us informed! nice to have the option of RCA / XLR unlike my current DIY TPA3255. Hope the sub out is controlled by volume with some kind of filter. They need to do away with the dated and frankly cheap fonts and graphics near the volume knob, everyone...
  9. S

    Aiyima’s TPA3255 PFFB based amplifier, coming soon

    Why so blurry? Shame they didn't up their style like Fosi.
  10. S

    3e Audio TPA3255 Amplifier Kit 480-1-29A Review

    Have it up and running, very interesting sound.
  11. S

    3e Audio TPA3255 Amplifier Kit 480-1-29A Review

    Thanks for getting back to me, Just about to look at that user guide now, I shl read the instructions! If I need to change op amps I'll just get some balanced XLR cables. Just wiring it up now to test it out, found a old case from a previous project, it's a bit "holy" on the back but "it'll do".
  12. S

    3e Audio TPA3255 Amplifier Kit 480-1-29A Review

    What's the "SE" mode of this module?
  13. S

    3e Audio TPA3255 Amplifier Kit 480-1-29A Review

    Some bits of mine arrived, 'Poo'chicon caps booo and only 3.75A air-cooled.
  14. S

    "Micro Bamboo Project" : 3E Audio 260-2-29A Stereo amplifier + Micro-Audio PSU

    Thank you, 12V Useful for the preamp section if perhaps retrofitting into a vintage amp, that way one would keep the original front panel controls operational. That's what I'll be doing anyway as they have a certain asthetic appeal to me. Waiting for something nice condition but broken to come...
  15. S

    "Micro Bamboo Project" : 3E Audio 260-2-29A Stereo amplifier + Micro-Audio PSU

    @daniboun thanks so much for your feedback regarding the PSU, and the amp build, I am planning on doing this now I have seen it done, certainly seems capable! Could I ask what parameters you used when ordering? 46V = 13A / 51V = 11,5A?
  16. S

    Streamer + DAC combo < 500 EUR

    You should see mine! although after REW EQ calculations it gave me one point at 380Hz, -5.5dB, Q 2.87. Assuming I performed it correctly. I did it from listening position not the speaker.
Top Bottom