Search results

will you attach the firmware?

Do you know how to restore factory settings e70 which is also written in the manual. You need to turn the knob counterclockwise in standby mode. Maybe you are invoking this function unintentionally? For example, the wife is cleaning the dust. ;)

I use the e70 in DAC-only mode, but if I wanted to digitally adjust the e70, I would set my amplifier just the same as in the picture. Are you talking about sanity? That's why there are entries that speakers or ears have been fried. I assume people don't think that way.

I'm going to quote myself again because no one is answering this. How are your amps set up? Do you turn them up to max volume? Because if the E70 is to explode at 0.0dB and this corresponds to 45-50% of the amplifier's gain power, the amplifier will not explode to 100% 0.0 dB should be the...

Don't forget to wipe. I have a universal IR remote. It is not an outstanding unit like Logitech, but it has a much greater range and operating angle. Works noticeably better than Topping. Topping must be aimed at the device. Maybe a poor quality diode, low power and angle

Hi, How does it count? Which filter is safe and does not cut the bandwidth for all DSD? Is number 3 enough?

Filters = button FIR, 1-8 (default 3, 5 sounds good too). Check on your own.

and on Twitter they didn't explain what "+ preamplifier mode" means?

The car has a thermometer, then is it a self-propelled thermometer? Still don't understand ? Watch Ifi DAC signature one!

T same as e70 standard with ES9028pro

still works

I asked in reference to Gotham G213s. Have you read that probably 9039 is more stripped compared to 9038? higher number is not always better.

That is, you confirm that it may shorten the life of the device if it is always on. You can always return the DO300 and replace it with an e70 or dx7pro+ ;)

All my audio devices have a 12V trigger and I can't imagine living and buying a device without this feature. You have a way. Sure, nothing will happen unless it shortens the life of the device.

Audible NO . Too bad it wasn't measured.

Returned. I left the e70. Do you forget to turn off the DO300 or do you keep it ON all the time even when you sleep?

DSP tube1,2,3 isn't necessary to hear audio distortion with PCM filter turned off. All you need is a song with the right frequency range. The DO300 has a PRO chip which has 7 filters, the non-pro DO200 has only three. This fact alone necessitates a different implementation. These ESS chips...

https://www.audiosciencereview.com/forum/index.php?threads/smsl-s-m-s-l-do300-dac.43367/

Yes

and they share the same design flaws