Search results

https://drive.google.com/file/d/1ZXsZ9geTZMBqUeZtG07VU5V8WrJ9UbXN/view?usp=drive_link The C200 firmware.

The M300se does not run the 43131's power saving mode under any circumstances

https://www.smsl-audio.com/portal/product/support the version 1 m300se can be upgrade here. Thanks

I can send you the firmware,please send me a email: [email protected]

on our officail web support

Is the switch USB1.1/2.0 will appear burst popping, it is recommended to switch after the need to power off and restart. Then it will be fine.

The firmware is being uploaded to the official website. You will be able to check the latest firmware for C200 in a moment. You can upgrade it from the official website Thanks

A new series of exterior design with tempered glass panel, both high-end feeling and durable! Cirrus Logic's latest audio decoder chip CS43131, with carefully designed circuitry, achieves an unprecedented 0.00013% (-117dB) distortion performance! The new third generation XMOS XU-316, PCM support...

Experience high-quality audio with the SMSL A50 Digital Power Amplifier TPA3116 Bluetooth 5.0 100Wx2 RCA Remote Control With Passive Speaker. This amplifier features a power amplifier chip TPA3116D2 and output power of 50W x 2 (4Ω), driving speakers up to 50-80W/2Ω in mono. It also supports...

We have already received the situation and we are preparing the relevant firmware to fix the problem. Thanks

First of all, thank you for discussing the problems of the PO100 series. Then observe the test data, we suspect that the PO100 AK may be defective - parts soldering caused by this test. The following is the data of our test on PO100 AK. So we request to be able to retest @VintageFlanker (we...

That can't be used, the D400es and D400ex is not be same. Can you Describe more about your machine problem? Please contact my email: [email protected]

Amir tells me that the Review report is almost done and will probably be updated on the ASR forum in the next couple of days regarding the results of the D400es and D400ex. You can share your usage realities there then. Thanks:D

The volume problem of D400ex can be fixed by this firmware: https://drive.google.com/file/d/1vgL_gQ4VoGN1mn9igL9WKKutBgpXyWbt/view?usp=sharing Thanks

Because a customer told me that his computer couldn't sense the firmware when it was updated after plugging it in, we're trying to figure it out. This firmware It can solve the problem of pop sound at the beginning of playing dsd and support dop, and the mac computer is available at the same...

https://www.smsl-audio.com/portal/product/downlist/id/13.html Support Dop now, please try. The firmware of the MCU is to solve the problem of POP sound when playing DSD files, USB firmware is to open DOP.

https://hifi-express.com/products/smsl-m500-mkiii Thanks amir, more info about M500 MKIII, can be check here. Thanks

Wait, uploading. Can see later. Thanks

We have a new firmware to fix this problem, and can be upgared the firmware from the official web. smsl-audio.com Support the DOP now. Thanks

SMSL M500 MKIII Hi Res Audio DAC & Headphone Amplifier ES9038PRO OPA1612A MQA-CD DSD512 XU316 Bluetooth With Remote Control Click for more: https://hifi-express.com/products/smsl-m500-mkiii SMSL M500 MKIII using top performance D/A chip ES9038PRO from ESS Technology; The high-performance power...