Search results

Yes, I essentially agree with your suggestions. Furthermore, I believe that the combination of the "time-shift method for perfect time alignment (in less than 1.0 msec precision) between subwoofer and woofer (ref. here)" and confirmation by REW's wavelet spectrum (of course both should be done...

Just for your/our reference,,, Both the height of center-of-gravity above floor and the size (area) of four-point-supporting base do matter on physical stability against horizontal shaking during an earthquake.

Thank you for your kind considerations. At least for me, I prefer large-screw spike type base unit, e.g. we can see typical photo (Sonus Farber SPs with metal base) here in this post. From aesthetic point of view, the base unit would be also very important for entire design impression, I...

Looks very nice and attractive at least for me, even though I prefer more darker black-brown non-glare wood surface.:) As I informed in my previous post #60, I would highly appreciate if you could start designing the (optional?) wide solid 4-point-level-adjustable metal base; again I myself...

Just for your reference,,, When I would like/need watching/hearing a TV channel with excellent audio handring, I take a kind of reverse-thinking approach where I use my 55-inch 4K resolution OLED TV (actually Panasonic TH-55HZ1800) as my second PC monitor (visual only, HDMI connection from my...

Yes, I understand well since I have been intensively building my DSP-based multichannel audio system (ref. here); the concept and approach can be also easily applied for single stereo DAC-headphone listening or for single-DAC plus passive (LCR-network) SP system (ref. here). As you may agree, I...

In case if you would use software audio player in PC or Mac (or even smartphones), you can easily test/implement system-wide "DSP software" (in my case "EKIO") for very much flexible XO/EQ/Group-Delay/Relative-gain controls even in case of using single stereo DAC and single passive (having...

In case if you would use digital music player upstream in your PC or Mac (or even smartphones) feeding into your DAC for headphone listening, then you may quite easily install and utilize DSP software for XO/EQ/Group-Delay/Relative-Gain controls on multiple Fq zones before sending the whole...

I essentially agree with @ernestcarl's nice suggestions. For better/best optimization of XO parameters between your subwoofer(s) and main speakers (woofers), I believe you need to measure your in-room air sound using measurement microphone at your listening position. First, for determination...

I appreciate your comment and preference since I myself personally have exactly the same visual vias;) which is one of the reasons I still love my vintage(?) Yamaha NS-1000, not NS-1000M (ref. here for comparison between the two);

Now, we have this thread; it will be rather expensive though...;)

The long black pipe in the center coming down from the ceiling should be the center subwoofer, right?:D

JRiver MC is an independent player software which does not run on a browser.

I agree, if OP would seriously need remote PC operation. I have been using free personal version of "AnyDesk" for long years which works really nicely within home LAN as well as through internet access from out of home. Using "AnyDesk" I was/am always operating my PCs and PC-workstations at my...

At least in my case of Windows-PC-based audio rig, I very much prefer JRiver MC to Roon.... (Roon was recently acquired by Harman, a Samsung group company, ref. here).

Thank you for your sharing the YouTube clip. I quickly analyzed the audio track of "Part 2" by Adobe Audition 3.0.1 after extracting audio into non-compressed AIFF format using JRiver MC 31. Yes, the meaningful music tones go down to around 15 Hz, and we can even see hall reverberation(?) around...

Fortunately, I have no such sampling-reset issue at all in "my audio rig" using VB Matrix routing shared in my above post #48 even on full shutdown with all the AC power off. If you would be interested, please refer here post #776 on my project thread for my "Ignition/Start-up Sequences" and...

Thank you for sharing this "recovery after PC's sleep mode" issue which so far I have not yet experienced since I never use Windows 11 "sleep mode" in my audio dedicated PCs. I used to have experienced other problems on several software wakeups and on Windows background procedures after...

As for USB 2.0 over LAN, I just noticed ATEN UEH4102; somewhat expensive, though.;) https://www.aten.com/global/en/products/usb-solutions/extenders/ueh4102/

I essentially agree with your point. In my setup in a typical(?) domestic room in Japan (with asymmetric furniture alignments and fairly enough sound deadening spaces and acoustic treatments though, ref. here), maybe I will still need L&R heavy and large subwoofers for very limited music tracks...